| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 61006 | 2005-08-21 08:13:00 | firmware upgrade screwed d-link modem | kwyjibo (7195) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 382826 | 2005-08-21 08:13:00 | Hi I have a D-Link DSL-302G modem and just tried to do a firmware upgrade on it as was having a few issues with port forwarding, anyway selected bin file and off it went, told me to reboot it and now it just seems a little screwed. Power light is on constant but Status, ADSL and USB just flash constantly, Ethernet light is off or on depending if connected.. but i cant factory reset it, or access it via a browser and it isn't even recognised as a USB device. is there anything i can do? :( |
kwyjibo (7195) | ||
| 382827 | 2005-08-21 09:12:00 | Did you update with the right firmware?? What was the name of the firmware update? |
Speedy Gonzales (78) | ||
| 382828 | 2005-08-21 10:51:00 | I'm kinda guessing i didn't by the fact it didn't work but the file was from the dlink site and was called dsl-202g . 201b40 . Looks like i've ruined it out right but if you have an idea then please let me know . oh and now ive also tried using the dlink firmware upgrade utility, this doesn't detect a connected device . what also confuses me is if the firmware upgrade had completely messed it would the leds still blink, and the ethernet led light with activity?! |
kwyjibo (7195) | ||
| 382829 | 2005-08-21 11:07:00 | Hmm ok, Dlink is Dlink not Dynalink right . Which one is yours here? . dlink . com/products/support . asp?pid=67#firmware" target="_blank">www . dlink . com Revision A or C? Is this where u downloaded it from?? dsl-202g . 201b40 isnt one of these files . on this site . And I would say the file you were meant to download, would start with dsl302-g, not dsl-202g . I know nothing about whats what on Adsl modems . I've never used one, and dont intend to, with current prices for broadband . |
Speedy Gonzales (78) | ||
| 382830 | 2005-08-21 11:13:00 | sorry did mean 302 got it from this page - www.dlink.com.au So anyway more info - I have noticed that when plugging the ethernet cable into it it is assigning the computer an address of 192.168.1.2 and i get ping responses from 192.168.1.1 (even though it's default ip WAS 10.1.1.1) so it's doing something right, but i cant log in to it via a browser, just times out.... ... i tried telnetting into it but im not too clued up on that.... any suggestions.. dont fancy buying another modem AGAIN :( |
kwyjibo (7195) | ||
| 382831 | 2005-08-21 11:24:00 | Looks like the right firmware. Did u read the revision info?? This looks like the firmware update name? WARNING: Loading R2.01MB40AU firmware will reset the modem to defaults. You will need to reconfigure your modem after loading firmware. R2.01MB40AU - Is this the update? 1. Add MSN 6 audio support 2. Improve trace route response 3. Correct DSL stats Did u do this? |
Speedy Gonzales (78) | ||
| 382832 | 2005-08-21 11:28:00 | yup read revision and knew that it would do that.. i just cant actually get to the config screen to reconfigure it and that's the prob. I'm also guessing these leds flash for a reason, just wish i could find something about it on the net? | kwyjibo (7195) | ||
| 382833 | 2005-08-21 11:30:00 | ok. Have u tried turning it off and on?? To see if it does anything?? Or resetting it. Thats if it can be reset. |
Speedy Gonzales (78) | ||
| 382834 | 2005-08-21 11:35:00 | If it's what I think it is, then I have bad new for me. I, too, have gone down this path before, as with many other D-Link owners I know. They really should start making better modems/firmware upgrades. Mine stuffed up, and I had the option of sending it back to factory for scripping in order to reflash/install new firmware, etc. This, I found, would have costed more than the router it self, so, since then, it's been in the cupboard -and I'm working off it's replacement, except wireless :D |
techie (7177) | ||
| 382835 | 2005-08-21 11:36:00 | reset doesn't work at all, just keeps flashing and powering it off, leaving it for a while and powering it back on just goes back to the same problem.. although this is the how it goes exactly - power light comes on on steady, adsl light comes on steady for a coupla seconds (no adsl cable plugged in atm), ethernet comes on steady (cable connected) and then status, adsl and usb leds start to continuosly flash and do so until i turn off | kwyjibo (7195) | ||
| 1 | |||||