Forum Home
Press F1
Thread ID: 61548	2005-09-08 12:27:00	VPN setting on Nokia M1122 connected with Windows 2000 ISA Server	xx_el_xx (8851)	Press F1

Post ID	Timestamp	Content	User
386948	2005-09-08 12:27:00	Hi all, My working company uses Nokia M1122 to connect to the Internet and with a SBS 2000 Server (with ISA Server). I'd tried to use a normal user (with dial in allowed) to VPN into the system which was gone through connected with no problem. However, when I tried to map to a folder in one of the workstation in the network. It failed with "System error 53 has occurred. The network path was not found.". I can ping to that workstation. The network share can be used inside the network without any problem. What had I done wrong or haven't done at all? The Nokia M1122 was set up by the previous support and I am blank on setting this device. TIA xx_el_xx	xx_el_xx (8851)
386949	2005-09-09 03:44:00	I assume you are trying to VPN in from the outside. Do you know if you are using IPSEC/L2TP, or if you are using PPTP? You could try connecting to the VPN from the internal network to take the Nokia out of the puzzle (using the same VPN connection but replacing the host with the internal address of the firewall rather than the external IP). Are you pinging the workstation sucessfully using it's name or it's IP address? Find out the IP address of the workstation and test it when connected from the internet using nbtstat followed by the IP address eg nbtstat -A 192.168.1.56 If you get a netbios nametable back then it should work. If not then there may be a bung firewall rule prohibiting you from using netbios to the workstation, but allowing ping. The more information you can provide the better.	BIFF (1)
386950	2005-09-09 05:14:00	It can be done, I did it a while back with my 2k3 server and M1122. I cant remeber where i found out how though... Daniel	dwnz (5333)
386951	2005-09-09 05:56:00	Heres the manuals for the modem...im fairly sure thats where i learned how to do it dsl.nokia.co.nz Daniel	dwnz (5333)
1