| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 138657 | 2015-01-01 06:26:00 | PC bluescreened when encoding video in handbrake | GameJunkie (72) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1391362 | 2015-01-01 06:26:00 | so i started encoding a video in handbrake, and it got to 25ish percent done when it froze and my pc bsod the dump file mentioned nvlddmkm . sys as the potential issue realtemp said during the encoding that the cpu was in the low 70 celcius temps at idle are mid 30's, although it has been really warm lately my current overclock is @ 4 . 7GHz my current geforce driver is the latest 347 . 09 I have encoded one video without issue This is the first time its BSOD on me, so im thinking its handbrake causing the issue?? tried encoding again, but it comes up with an error caused by hal . dll and ntoskrnl . exe any other usage that i do on the pc is fine, just when i try to encode my video in handbrake is there another video encoding software i can use?? |
GameJunkie (72) | ||
| 1391363 | 2015-01-01 08:01:00 | When HB is trying to run its using the graphic Drivers this could be why you are getting the hal error. Have a read of the following, explains teh first error as well as a, which if it is the main cause then it should fix the second. is there another video encoding software i can use?? Theres plenty, what are you trying to do ? Problem is if its the fault above then any other encoder will more than likely do similar errors. |
wainuitech (129) | ||
| 1391364 | 2015-01-01 08:03:00 | When HB is trying to run its using the graphic Drivers this could be why you are getting the hal error. Have a read of the following, explains teh first error as well as a, which if it is the main cause then it should fix the second. Theres plenty, what are you trying to do ? what am i reading WT??? I've recorded gamplay using shadowplay, and i want to encode the file so its smaller to upload to youtube |
GameJunkie (72) | ||
| 1391365 | 2015-01-01 08:41:00 | Okay, this time I'll put the link ;) www.computertipsfree.com One program that works well is Vidcoder http://vidcoder.codeplex.com/ Under Encoding - "setting" is where you fiddle about with sizing, output etc. |
wainuitech (129) | ||
| 1391366 | 2015-01-01 10:16:00 | What was your GPU temp during the encode? Download and keep Speccy open beside it while encoding. Free from piriform.com/speccy |
Chilling_Silence (9) | ||
| 1391367 | 2015-01-02 04:30:00 | What was your GPU temp during the encode? Download and keep Speccy open beside it while encoding. Free from piriform.com/speccy bump not sure but the fans dont spin up until about 66 degrees |
GameJunkie (72) | ||
| 1391368 | 2015-01-02 06:20:00 | You'll be getting the hal.dll stop error, because of the overclock. Since a hal.dll crash is CPU related. Upload the dmp files somewhere like onedrive then post the link | Speedy Gonzales (78) | ||
| 1391369 | 2015-01-02 07:02:00 | so i should knock the overclock back??? i'll have to reinstall handbrake and re-encode the video |
GameJunkie (72) | ||
| 1391370 | 2015-01-02 18:45:00 | Yup. Or put it back to default. See if it crashes then. | Speedy Gonzales (78) | ||
| 1391371 | 2015-01-03 00:36:00 | I had the same problem, freezing using Premiere until I cut back my processor (AMD FX-8350) from 4.3 Mhz to 3.8. Never had a problem after that. | fnphoto (2434) | ||
| 1 2 | |||||