| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 62120 | 2005-09-27 08:13:00 | Port Forwarding | Naruto28 (7236) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 391707 | 2005-09-30 11:40:00 | Under 'HELP' and under 'ID explained' it says, near the bottom: '- If the ID is high, it does not matter how high it is. An "even higher" ID is not better or offers any advantages.' So a high I is not better than a low ID? Is this true? :confused: |
Naruto28 (7236) | ||
| 391708 | 2005-09-30 11:53:00 | What the heck is a high or low ID? Explain please someone (spot the non e-mule user :p) |
Myth (110) | ||
| 391709 | 2005-09-30 23:18:00 | So from the sounds of it you've only told it not to assign a dynamic IP address internally for XYZ range so you know its not going to conflict with any static IPs. Otherwise, I fail to see what Port-Forwarding you've actually done (Have I mis-read it?) Chill. |
Chilling_Silence (9) | ||
| 391710 | 2005-10-01 21:08:00 | I don't know either. I only followed wat they said on the portforward site and, cool, i got a static address and a High ID. Thats enough for me. As long as I got a High ID, then... its cool. :thumbs: :rolleyes: |
Naruto28 (7236) | ||
| 391711 | 2005-10-01 22:30:00 | Static IP on your LAN, or has your ISP assigned you a static IP? | Chilling_Silence (9) | ||
| 391712 | 2005-10-06 05:42:00 | After MONTHS of trying, I have almost managed to get the ports forwarding to the right places on my DSL-302G. My apache server in my home network serves pages fine when acessed from outside the network. My problem now, is that when I try to access my WAN IP or domain name from within my home network (which should be served by my apache server the same way as it would from outside the network) my modem picks up the request and tries to serve the modems web-based configuration page. So in short, how do I change the port on which the modem serves its control panel to something other than 80? Or if that can't be done, how can I disable the modem config webpage from being served when I try to access my domain name or WAN IP from inside my network? Thanks in advance. |
Malcoholm (8976) | ||
| 391713 | 2005-10-06 07:48:00 | If your router is like mine, it will steal any internal traffic going through port 80 (unless you use the internal name/ip of the other computer) no matter what port you are using for the config page. A high emule ID is better than a low one. I think it just has 2 ranges of unique IDs - one for the people who could have firewall trouble & one for the people that you should have no trouble downloading off. |
Greven (91) | ||
| 391714 | 2005-10-06 15:48:00 | I got the Static IP on my LAN. :D Sorry 4 not replying 4 so long :rolleyes: |
Naruto28 (7236) | ||
| 391715 | 2006-03-03 22:07:00 | Can someone help me please..... I just starting to use emule 0.47a. ( new to this ) Everytime i open or run emule.. I always get " a network cable unplugged" i have followed the port forwarding steps and still the same thing and also giving me lowid status. I have Dlink 624 router and my pc is connected to that router. any suggestion....?? Thanks J |
johnnyline (8977) | ||
| 391716 | 2006-03-04 06:12:00 | I have been using EMule for about 4 years and I have it well sussed out. I cant stay long now but I will be available to help on monday. In the meantime check out the eMule help under Ports Firewalls & Router. Ian |
i-gordon (962) | ||
| 1 2 3 4 | |||||