| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 63915 | 2005-11-26 20:03:00 | New Build not Working | 2pac (9315) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 407943 | 2005-11-26 20:03:00 | I just went out and bought peices to make a comp. I get everything together and everything boots fine but i get no screen from my monitor. Ive reset CMOS i tryed 2 different monitors and 3 differnet Video Cards PCI and AGP any ideas would be helpful Motherboard specs are Model: Gigabyte GA-8IPE1000-G Motherboard CPU: P4 2.4 GHZ FSB: 800/533/400 MHz Chipset: Intel 865PE MCH, Intel ICH5 Ram: 1 GB total of DDR 400 on Dual 2 x Serial ATA ports 1 x AGP 8x slot 2 x UltraDMA 100/66 Bus Master IDE 5 x PCI slots (PCI 2.3 compliant) 3 x Audio ports (Line-in / Line-out / MIC) 4x USB 2.0 ports |
2pac (9315) | ||
| 407944 | 2005-11-26 20:11:00 | Obvious thing to recheck is that all internal connections are firm and in their right places. Can you hear activity from the hard drive? |
Greg (193) | ||
| 407945 | 2005-11-26 20:14:00 | Everything is connected fine and the HD make noise the HD LED on the front of the Case lights up. I know my way around a computer its just i have ran outta ideas why this is do ing what its doing so im reaching out for other ideas so what else does anyone got | 2pac (9315) | ||
| 407946 | 2005-11-26 20:35:00 | Is the ATX power connector from the PSU connected to the ATX 12v connector on the mobo?? Without this, nothing will boot. | Speedy Gonzales (78) | ||
| 1 | |||||