| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 63933 | 2005-11-27 07:33:00 | Front Panel Audio wiring for Excell 7798 case | Lizard (2409) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 408014 | 2005-11-27 07:33:00 | Hi all, I'm trying to wire up the front panel audio connectors to my MSI K8N Neo Platinum Nforce 3 motherboard. The wires I have to work with are EarL Ear_RetL EarR Ear_RetR Mic_VCC Mic_Data Gnd The pins I have to work with are: 1 Aud_Mic 2 Aud_Gnd 3 Aud_Mic_Bias 4 Aud_VCC 5 Aud_FPOUT_R 6 Aud_Ret_R 7 HP_On 8 Key 9 Aud_FPOUT_L 10 Aud_Ret_L The headphone pins seem pretty straightforward - Ear L & R on Pins 9 and 5, with the Return wires on 6 and 10. Indeed, the headphones work fine on the front panel. Its the microphone I can't get to work. I figured Mic_VCC related to Aud_VCC, and GND on Aud_GND, but Mic_Data didn't seem to work on either Aud_Mic or Aud_Mic_Bias. Can anyone tell me which goes on which? Cheers Lizard |
Lizard (2409) | ||
| 408015 | 2005-11-27 07:53:00 | Look here (www.pctechguide.com) I would say Mic_VCC would go on pin 1 and Mic_data on pin 3 so theyre connected sideways, not going across the pins. |
Speedy Gonzales (78) | ||
| 408016 | 2005-11-27 08:13:00 | 2 Aud_Gnd 4 Aud_VCC 7 HP_On 8 Key Aren't used for the front panel connection. Ran out of tries to enter this above. |
Speedy Gonzales (78) | ||
| 408017 | 2005-11-27 08:16:00 | Look here (www.pctechguide.com) I would say Mic_VCC would go on pin 1 and Mic_data on pin 3 so theyre connected sideways, not going across the pins. Worked well. Thanks Speedy Lizard |
Lizard (2409) | ||
| 408018 | 2005-11-27 08:18:00 | Good to hear its up and running :thumbs: I had the same prob a few weeks ago, with these cases. Trying to connect the front audio/mic to the mobo. |
Speedy Gonzales (78) | ||
| 1 | |||||