Forum Home
Press F1
 
Thread ID: 65445 2006-01-18 06:20:00 ECS Motherboard slot1/socket 370. Murray P (44) Press F1
Post ID Timestamp Content User
422141 2006-01-18 06:20:00 I need a bit of help to track down the manual for an ECS P6BXT-A+ revision 1.3B motherboard (slot 1 or socket 370 P11, P111 or celery).

There is no problem with it, at the mo it's happily running a celery 370 533MHz , I'd just like to have the manual and if poss drivers and BIOS for large disks. I've had a fossick around the internet and the Elite site but they don't list this particular board in their archives, whats worse a manaul supposedly for a P6BX-A+ (thinking it may be similar) turned out to be for a totally different model.

Ta
Murray P (44)
422142 2006-01-18 06:27:00 www.ecs.com.tw(2.2E)&MenuID=0&LanID=0

It's revision 3 though but the type is right.
godfather (25)
422143 2006-01-18 07:13:00 Thanks Goddie,

had just downloaded one from here ( . ecsusa . com/downloads/manual_p6b . html" target="_blank">www . ecsusa . com) and was about to post, but grabed your link anyway because it was listed as a larger file, they're both the same though, about as close as I'm going to get I think . Managed to find an updated BIOS too, but no drivers at all .

How'd you find the board on the Taiwan site? I drew a blank there, could only get (sans T) P6BX-A+ 1 . 1 .

Anyway, the wee darling is running Mepis Linux (3 . 4-2 RC1, for the freaks) on 194MB of ram and a 9 . 4GB HDD and doing it very nicely . The odd thing is, the info I could find on the board, only had it running a celeron 400MHz CPU, but it's spinning along with a 533MHz ( . cpu-world . com/CPUs/Celeron/Intel-Celeron%20533%20-%20FV80524RX533128%20" target="_blank">www . cpu-world . com(FV524RX533%20128) . html) at 8x 66HHz, not that I would want to overclock it, of course :rolleyes:, right, I'll get me coat .
Murray P (44)
422144 2006-01-18 08:51:00 Thanks Goddie,

How'd you find the board on the Taiwan site? I drew a blank there, could only get (sans T) P6BX-A+ 1..

I just used a wonderful site you might like to bookmark, it took all of 15 seconds to locate the manual and confirm a live download link. www.google.co.nz (http:)
godfather (25)
422145 2006-01-18 10:52:00 I just used a wonderful site you might like to bookmark, it took all of 15 seconds to locate the manual and confirm a live download link . . google . co . nz (http://www . google . co . nz/" target="_blank">www . google . co . nz (http:)

Basta . . umm, I mean good man . :thumbs:

I tried the Taiwanese ECS site forst, then, I must have been used goggle this time around, instead of the other one, because all the links were dead ends . Finally went in through links via DriverGuide . com, to the USA which strangely linked to completely diff looking web pages than the what I had checked out previously and, which linked back to the Taiwan site for downloads . Maybe I should have looked at the Support page, and maybe I shouldna given up so soon, but hey, appreciate your 15 seconds :blush:
Murray P (44)
1