Forum Home
Press F1
 
Thread ID: 65519 2006-01-21 01:53:00 All Greek to Me! meg_h_nz (6960) Press F1
Post ID Timestamp Content User
423326 2006-01-24 00:13:00 One picture is worth a thousand words . . . :thumbs:


That's just displaying a wrong (or "no") font . But how it got to be doing that . . .

It has to be happening in the video card . It's not the BIOS . :thumbs: Perhaps the video is not starting up in the default plain VGA mode .

How? :waughh:
Graham L (2)
423327 2006-01-24 00:24:00 Can you still get to ME and does it appear normal? B.M. (505)
423328 2006-01-24 01:16:00 Hi guys
The computer still works fine (apart from not recoginsing the 40GB HD) and there are no other problems . I have taken the HD out and tried it with my older 8GB HD (running Win ME) and it still does the same thing when I try to enter the BIOS set up .
I would LOVE to re-format again but when I run the Start up floppy I get a simillar screen and cant "read" the prompts so I am unable to do a re-format .

Any way I am off to try disabling the BIOS guardian (again) and seee if I have any luck this time . It is too hot here today to stress so if it dosent work I will probably pack it away in the shed!
Thank you for all the help
Meg
meg_h_nz (6960)
423329 2006-01-24 01:54:00 Hmm I wonder if that system was hit with something like this ( . nai . com/vil/content/v_99040 . htm" target="_blank">vil . nai . com) & this ( . symantec . com/avcenter/venc/data/pf/w32 . magistr . 24876@mm . html" target="_blank">www . symantec . com) (the same worm) .

This is a worm and its destructive .

It can also erase the BIOS, and destroy the sectors of a hard drive, on some systems .

Re-flashing the BIOS may or may not fix it .
Speedy Gonzales (78)
423330 2006-01-24 02:03:00 Yup, just found the same site.

It has also got this

BIOS Guardian

BIOS Guardian by default is enabled. It must be disabled in order to
reflash BIOS, thus effectively acts as a fire-wall against viruses that can
attack the BIOS while the system is running.

WARNING: While excute Step3 below, please do not turn off the
sytsem power in order to avoid BIOS damage.

BIOS Guardian can be disabled as follows:

1. Go to BIOS Set Up Menu. (Press Del key while booting.)

2. Go to Advanced BIOS Features Set Up Submenu.

3. Disable BIOS Guardian.

4. Save the setting, and restart system.

NOTE: However, if it is disabled and while boot the system, the
POST screen will be held and shows you the message to let you
know the current status of BIOS Guardian.

To press G key will enable the BIOS Guardian again; or simply to press the space bar will continue the booting process

Easy Key
Instead of completing the multi-layered BIOS setup process these 3 Easy
Key functions provide direct access to Sub-Menu’s when completing

BIOS settings adjustments.

Easy-Keys are as follows:

Ctrl + c: To enter clock settings menu.
Ctrl + p: To load Performance Default settings and restart.
Ctrl + f: To load Fail-Safe Default settings and restart. - Press ctrl+f in the BIOS. See what happens.
Hi Speedy
I disabled BIOS Guardian and followed the instructions to the letter...... still the same.
I checked out those sites you had links for and I am pretty sure that it didn’t have this virus as it was originally running Win NT and these ones seem to hit other versions on Windows.
I am seriously thinking of tossing it in as I don’t want to spend my whole holidays messing with this pc. I will just set the old 433 Celeron back up for the kids and keep my eye out for another older pc going cheep some time.
Many thanks for all the help
Have a great week

Meg
meg_h_nz (6960)
423331 2006-01-24 02:08:00 Read my previous post / link, that worm affects NT as well, and even if u format the hard drive, this wont fix the BIOS. If this system was hit with this worm. Speedy Gonzales (78)
423332 2006-01-24 02:14:00 sorry on closer inspection of the site it does say NT.
I guess I am stuck then. Never mind.
Thank you for all your help.

Meg
meg_h_nz (6960)
423333 2006-01-24 02:16:00 Well, you could try re-flashing the BIOS . If u haven't tried yet .

To see if it goes back to normal . Just make sure you follow the instructions in the zip file u gave here in a previous post .
Speedy Gonzales (78)
423334 2006-01-24 02:31:00 Well, you could try re-flashing the BIOS . If u haven't tried yet .

To see if it goes back to normal . Just make sure you follow the instructions in the zip file u gave here in a previous post .
Sorry dont know what zip file you are taliking about . . . . .
meg_h_nz (6960)
423335 2006-01-24 02:38:00 Sorry dont know what zip file you are taliking about.....

This one (www.fic.com.tw)

The one called vja43. Its the BIOS for your motherboard.

Its under the BIOS link under the quick link option (on the right), on the link (www.fic.com.tw) you posted before.
Speedy Gonzales (78)
1 2 3 4 5 6 7