Forum Home
Press F1
 
Thread ID: 66743 2006-03-06 04:00:00 Thermal paste Mike (15) Press F1
Post ID Timestamp Content User
435893 2006-03-06 04:00:00 I have a Celeron 2.2, which I want to take out of my old motherboard and put into my new motherboard. Do I need to apply thermal paste? Or will whatever was on there before be enough?

Mike.
Mike (15)
435894 2006-03-06 04:41:00 you will need to clean the cpu & base of the heatsink & apply new thermal paste Greven (91)
435895 2006-03-07 01:14:00 Celerons don't generate much heat, but a fresh bit of thermal paste is pretty much required. Artic Silver is considered very good.

Be careful when removing the CPU fan. Some thermal paste will "gum up" over time, and you can force a CPU out of the socket prematurely.
kingdragonfly (309)
435896 2006-03-07 01:22:00 Celerons don't generate much heat, but a fresh bit of thermal paste is pretty much required. Artic Silver is considered very good.

Be careful when removing the CPU fan. Some thermal paste will "gum up" over time, and you can force a CPU out of the socket prematurely.Thanks - I will buy some thermal paste next time I go to DSE. And I suppose I'll also need to buy something to clean the fan and CPU with too? :)

Mike.
Mike (15)
435897 2006-03-07 01:30:00 I suppose I'll also need to buy something to clean the fan and CPU with too? :)

Isopropyl Alcohol & a cleaning instument that won't leave behind any fibers (like most materials do). Or you could get fancy & buy one of those artic silver kits with their special cleaning stuff.
Greven (91)
435898 2006-03-07 01:45:00 Isopropyl Alcohol & a cleaning instument that won't leave behind any fibers (like most materials do). Or you could get fancy & buy one of those artic silver kits with their special cleaning stuff.Uh, what is "one of those artic silver kits..." and where would I get one?

Mike.
Mike (15)
435899 2006-03-07 01:48:00 I just use the corner of a plastic credit card sized card for my cleaning apparatus with Isopropyll Alcy.
If the CPU has no exposed traces, I might use my fingernail if nesscary.
bob_doe_nz (92)
435900 2006-03-07 05:43:00 Uh, what is "one of those artic silver kits..." and where would I get one?

ascent.co.nz - I would only really reccomend getting it if you used the thermal pad instead of thermal paste when you first installed the heatsink - the thermal pads can be a real pain in the ass to clean off once they are melted on.
Greven (91)
1