Forum Home
Press F1
 
Thread ID: 66962 2006-03-12 22:16:00 SATA and PATA compatibilities Greg (193) Press F1
Post ID Timestamp Content User
437818 2006-03-12 22:16:00 I'm about to buy my first SATA drive, onto which I'll be transferring my op sys.

1) Are there any known compatibility issues running both PATA and SATA drives (the PATA will be my backup drive).

2) Any free utilities to "ghost" my existing PATA drive opsys, data, games and apps (on four seperate partitions) to the new SATA drive, so that I don't have to reinstall everything?

Thanks.
Greg (193)
437819 2006-03-12 22:20:00 Googled a link or two for ya"....

www.findarticles.com

www.directron.com

bluecouch.com.au
SurferJoe46 (51)
437820 2006-03-12 22:28:00 Nope, nothing wrong with running SATA and PATA.

I'm using a 120GB SATA as my bootdisk on this (partitioned). And an 80GB for file storage (also partitioned).

They work fine together.

I would say it'll be better if you reinstall XP on the SATA, instead of trying to clone the PATA and then put it on the SATA.

Is SATA onboard, or are you going to use a SATA PCI card??
Speedy Gonzales (78)
437821 2006-03-12 22:30:00 Ta Joe. Greg (193)
437822 2006-03-12 22:33:00 Is SATA onboard, or are you going to use a SATA PCI cardOnboard. Greg (193)
437823 2006-03-12 22:41:00 OK, yer it should be fine then .

Just remember if the PSU doesnt have SATA power adapters, you'll have to buy the SATA molex power adapter/s and connect it to the SATA .

Since the cable that comes with a SATA (the cable that connects to the onboard header) is only for data, not the power .
Speedy Gonzales (78)
437824 2006-03-12 22:56:00 OK, yer it should be fine then .

Just remember if the PSU doesnt have SATA power adapters, you'll have to buy the SATA molex power adapter/s and connect it to the SATA .

Since the cable that comes with a SATA (the cable that connects to the onboard header) is only for data, not the power . Ah . Cheers for that . I shoulda known because it was exactly the problem one of my brothers had when he installed his first SATA drive .
Greg (193)
1