| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 67651 | 2006-04-02 17:21:00 | How To Set WebServer | tracky (10122) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 443147 | 2006-04-02 17:21:00 | How To Set WebServer ? I got 1 Planet ADE-4400 Router which support DDNS so i go and register 1 address at dyndns.org but i got a problem when i go to my website... e.g. (abc.dyndns.org) it will redirect to my "Router Configuration Website" but not my Webserver (with LAN IP 192.168.1.11) i try to use Port Forwarding (Start Port:1668, End Port: 1669, IP:192.168.1.11) but it still wont redirect to my WebServer just keep going to the Router Config Website PLEASE HELP!!! |
tracky (10122) | ||
| 443148 | 2006-04-02 19:42:00 | Hi What you need to do is alter Hosts file 192.168.1.11 abc.dyndns.org Host file is located in C:/Windows/System32/Drivers/ if you use windows /etc/hosts if you use linux Cheers Tede |
Tede (10123) | ||
| 443149 | 2006-04-02 22:35:00 | i try to use Port Forwarding (Start Port:1668, End Port: 1669, IP:192.168.1.11) An HTTP server runs on port 80 (normally). It looks like your configuration misses that one. Using Tede's answer will allow you to access your webserver from within your lan; redirecting port 80 on your router will allow people from the internet (i.e. outside your lan) to get to the server. |
Mickey (9928) | ||
| 443150 | 2006-04-03 06:27:00 | Also if you want to run your web server on the internet make sure your ISP allows it PS: Welcome to PressF1 tracky & Tede :) |
stu161204 (123) | ||
| 1 | |||||