| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 69648 | 2006-06-07 22:12:00 | 98SE Errors | SurferJoe46 (51) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 461456 | 2006-06-07 22:12:00 | I get the following...now over 40 times..why? Standard Mode: Fault in MS-DOS Extender EC=0000 CS=0053 IP=278D AX=0000 BX=0034 CX=03F0 DX=0010 SI=0334 DI=0001 BP=4278 DS=0000 ES=0034 SS=004B SP-425C D:/> Is this something in the harddrive? Did I format the hdd wrong? I have gone thru Setup and tried various 98se boot discs with and without cd-rom support enabled. I've set the BIOS at defaults and tried a whole lot of changes that went nowhere. This is just an old COMPAQ PRESARIO 4550, but it had 98SE running in it before with a NIC and all. Now it doesn't work and I'm getting angry. I only want this to run a reference hard-disk-installed program, and I figured that 98SE would be the simplest to use for that. |
SurferJoe46 (51) | ||
| 461457 | 2006-06-07 22:47:00 | Have a look here, might help support.microsoft.com |
borax (7078) | ||
| 461458 | 2006-06-07 22:58:00 | Have a look here, might help . microsoft . com/kb/q87239/" target="_blank">support . microsoft . com Yeah . . . been there and the list is just so long . . . but I am hovering over the RAM problem . . . . . just really neat! I cannot get RAM for this dinosaur anywhere! Has anyone had this same problem? |
SurferJoe46 (51) | ||
| 1 | |||||