| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 69701 | 2006-06-09 04:00:00 | PXE-E61 Media Test Failure | bk T (215) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 461826 | 2006-06-09 04:00:00 | When booting up this machine, just after POST there is a PXE-E61 Media Test Failure. ... DHCP ...... etc stops there for about 30 sec before Windows loads. What is this about? |
bk T (215) | ||
| 461827 | 2006-06-09 06:36:00 | PXE = Pre-Boot Execution Environment. In english - its a method of booting your machine from a network, assuming you had all the other bits to do it. Anyway - if you go into the bios you should find that as well as harddisk, CD and whatever else it tries to boot from network is in their as well, either move it below the hard disk or remove the entry. |
gcarmich (10068) | ||
| 461828 | 2006-06-09 06:39:00 | ha everytime i browse the forum and open threads in tabs in firefox.. then read then answer..but someone seems to manage to answer before i reach my tab :stare: ..anywayz..here was my answer.. change your boot order settings in bios i think pxe thing is something boot from network or something..can't remember if you change your first boot device to your hdd then it should just boot straight into your system without the wait |
heni72847 (1166) | ||
| 461829 | 2006-06-09 08:28:00 | That was the first thing I checked. My BIOS boot sequence: 1st: HDD and disbaled 2nd & 3rd. Any other suggestions? |
bk T (215) | ||
| 1 | |||||