| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 71063 | 2006-07-25 12:12:00 | Dynalink RTA1025w & Azureus NAT problem | supersi (8401) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 473411 | 2006-07-25 12:12:00 | I've just got myself a Dynalink RTA1025w wireless router/modem. I'm trying to port forward for Azureus but NAT test comes back as fail. My settings are PC's i.p 192.168.1.2 default gateway 192.168.1 I can't find a step by step guide to port forwarding guide for this router like my old one had online. The manual is confusing as hell and when I go into the router there are all these options (see screenshots below) www.imagef1.net.nz www.imagef1.net.nz www.imagef1.net.nz any ideas? Also what about windows firewall etc... |
supersi (8401) | ||
| 473412 | 2006-07-25 12:32:00 | image 3. Virtual server/Port Forwarding is where you need to open ports. | berryb (99) | ||
| 473413 | 2006-07-25 12:39:00 | First thing, when you're uploading pics, please save them as jpegs, as bmps are huge and take a long time to load. I'm not sure if you've tried this (www.portforward.com) page but it seems to look similar to the pics you posted, so try that one. On a side note, if your router supports UPnP it might be easier to use that. HTH roddy edit: Re Windows firewall, iirc there is an option in Azureus to automatically add it to teh exceptions. |
roddy_boy (4115) | ||
| 473414 | 2006-07-25 20:58:00 | Didn't work......I'm going to try UPnP. Do I just enable UPnP in the router? Do I need to do anything else? | supersi (8401) | ||
| 473415 | 2006-07-25 21:57:00 | And enable it in Azureus. That's all :) | roddy_boy (4115) | ||
| 1 | |||||