Forum Home
Press F1
 
Thread ID: 71356 2006-08-03 06:36:00 No Keyboard or Mouse???? B.M. (505) Press F1
Post ID Timestamp Content User
475782 2006-08-03 06:36:00 Well here’s a weird one. A friend’s computer refuses to load the keyboard or mouse yet the post gives no error beeps and Windows loads normally.

He brought it around here and it does the same on my keyboard and mouse.

Unfortunately, with no keyboard or mouse things get a bit tricky! :)

It’s a MSI 7081 M/B if that is of any help.

The only thing I can think of is the M/B, but I thought I’d better check for any other ideas.

The fact it gives no Keyboard Error and gets past the post (one Beep) to loading Windows normally, confuses me. :help:
B.M. (505)
475783 2006-08-03 06:46:00 Have you checked in the BIOS? It may be setup not to halt on errors, if that is possible? gkar (5215)
475784 2006-08-03 08:16:00 I'd like to be able to. :)

However, when you can't press F1 to enter the BIOS set-up (because the keyboard don't work) it remains a real problem. :)
B.M. (505)
475785 2006-08-03 08:18:00 Have you checked in the BIOS? It may be setup not to halt on errors, if that is possible?

dude he has no keyboard he cant accsess the BIOS

check the MOBO man, and also check the USB ports. (is there any lights on the mouse when its plugged in?)
-spoonz- (10832)
475786 2006-08-03 08:20:00 lol, u beat me to the msg -spoonz- (10832)
475787 2006-08-03 08:33:00 Wahhhhhh, now I’ve done it. :(

I removed the CMOS battery to reset the BIOS to default and now all I get is “Press Del to enter Set-Up or F1 to continue” and still no keyboard. :angry

Just has to be the M/B surely??? :rolleyes:
B.M. (505)
475788 2006-08-03 08:42:00 :blush: ooops. Been a long day.

How long did you leave the battery out? Some sites I've read state for a minimum of 10-30 minutes. Did you also try resetting the CMOS via the pins on the mobo?

MSI have a forum which might have a post similar to yours.
forum.msi.com.tw 5b&#3
gkar (5215)
475789 2006-08-03 09:09:00 Thanks for the link gkar . :thumbs:

I’ve found that the M/B’s a Socket A and has been “Retired” :lol:

The sods must be clairvoyant, because that’s what’s in store here I figure . :lol:
B.M. (505)
475790 2006-08-03 10:18:00 A flat CMOS battery will do things like that. When the battery in my old P166 gets low it halts at boot with a "no keyboard" error. A new battery fixes it.

Cheers

Billy 8-{)
Billy T (70)
475791 2006-08-03 16:45:00 Insomnia Alert, Insomnia Alert:

Yep, I had checked the Battery Billy thinking along the same lines and it’s OK (3.07v.)

The odd thing is I don’t get any error message or extra beeps on post.

Anyway, I was sound asleep when I woke thinking, did any lights flash on that keyboard at power on? So, out of bed, on with the kettle, and nooop, no lights flash on keyboard.

Now, this is leaving me to conclude that the power to the keyboard and mouse is missing. I wonder if something has shorted in his keyboard or mouse and burned out the 12v or 5v rail on the M/B?

Sooo, can anybody tell me if the keyboard & Mouse run on 12v or 5v and what the pin-out for the socket is? Is there any protection in the event of short circuit in a keyboard or mouse lead?

I’ll do a bit of Googleing anyway whilst enjoying my cuppa and you guys are sleeping.
B.M. (505)
1 2 3