| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 71464 | 2006-08-06 20:59:00 | NEED HELP AS SOON AS POSSIBLE!!! | McCloudX13 (10922) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 476606 | 2006-08-09 19:50:00 | Test the board on a bench? How do you that Drcspy? Sounds like a usefull tip. Does the board need to be grounded through the case screws? | Ferg (2559) | ||
| 476607 | 2006-08-09 21:16:00 | just pull the board out and stick it on a NON conductive surface then plug in the powersupply/ram/cpu and then 'short' the correct pins on the board where the lead usually plugs in for the case power switch with a screwdriver to start it up ........then see if it'll boot to the bios.........if it does then switch it off and plug in the harddrive.........and see how far you get | drcspy (146) | ||
| 476608 | 2006-08-11 19:52:00 | I have the worst luck, heres where I stand. I got a Windows XP HE disk put it in and it inspects and gets to a screen asking ENTER to set up WIndows XP now, R to Repair, and F3 to quit. Freezes on that screen. Man I don't know what to do, I was hoping this would solve everything, starting from scratch. Neways still lookin for ne help i can get. thanks guys. | McCloudX13 (10922) | ||
| 1 2 3 | |||||