| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 72391 | 2006-09-11 07:56:00 | where's my hard drive? | joemac (9739) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 483951 | 2006-09-12 10:40:00 | This is what the initial screen reads: Press DEL to run setup Press F8 for BBS POPUP 1 AMD North bridge, Rev E6 Share Memory Size:64MB Dual-Channel DRAM Mode Initializing USBControlers .. Done. 960MB OK USB Device(s):1 Keyboard, 1Hub Auto Detecting Sec Master..ATAPI CD-ROM Auto Detecting 3rd Master..IDE Hard Disk Sec Master: LITE-ON DVDRW SHW-1635S YSOW Ultra DMA Mode-4 3rd master:ST3160811AS 3.AAE Ultra DMA Mode-6, S.M.A.R.T. Capable and Status OK Auto-detecting USB Mass Storage Devices.. 00 USB mass storage devices found and configured Primary master Drive -ATAPI Incompatible Press F1 to resume |
joemac (9739) | ||
| 483952 | 2006-09-12 10:43:00 | I have tryed Seagate Discwizard which detects it but needs a windows OS I think. But I am just gonna try telling it that I have one and see what happens | joemac (9739) | ||
| 483953 | 2006-09-13 07:42:00 | OK so I tryed that and as far as I can tell i did a successful disk format but I still can't find it on the OS. I tryed the different SATA ports and they seem to correspond to 3rd master IDE, 3rd slave IDE, 4th master IDE and 4th slave IDE. | joemac (9739) | ||
| 483954 | 2006-09-13 08:22:00 | The HDD has to be activated before you can see it... Go start, run then type "DISKMGMT.MSC" you then should see the drive, you will need to partition it and assign a drive letter and then it will appear in "My Computer" | The_End_Of_Reality (334) | ||
| 1 2 3 | |||||