Forum Home
Press F1
 
Thread ID: 73002 2006-10-04 03:19:00 wosh with router hcl (10925) Press F1
Post ID Timestamp Content User
489054 2006-10-04 03:19:00 I'm trying to set up woosh with a Linksys WRT54g router & it isn't working.

I can connect the Woosh modem directly to my computer & connect fine with a standard PPPOE connection, but when I plug the modem into the WAN port on the router & give it the same details, it says "can not get ip address from PPPOE server"
hcl (10925)
489055 2006-10-04 06:01:00 After spending a couple of hours on the phone to Linksys & them making me jump through all sorts of hoops, they told me that there is a new firmware version out that is only available on the US site.

If I knew I didn't have the latest firmware, I would have tried that first
hcl (10925)
489056 2006-10-04 07:55:00 hcl i doubt the firmware has anything to do with it. The WRT54G's are notoriously difficult to setup using the WAN port. From what i can remember its something to do with the firewall, the WAN port has more safeguards compared to the switch ports. Do the Woosh modems have a DCHP server? If it does it would be easy just to plug it into the WRT54G switch port and disable routing. Pete O'Neil (6584)
489057 2006-10-04 09:23:00 I'm afraid that woosh modems don't have DHCP - you have to connect to them via PPPOE.

The new firmware fixed the problem. perhaps it disables some of the extra safeguards you were talking about.
hcl (10925)
489058 2006-12-06 06:36:00 Hcl,

Could you tell me what steps you took to install the woosh modem with the wrt54g router?

I have the same router and right now completely stumped trying to install it. I rang the woosh customer service and they are no help at all.

Thanks very much!

Welli
wallarro (11242)
1