| Post ID |
Timestamp |
Content |
User |
| 491874 |
2006-10-16 12:01:00 |
is there any way of turning a printer such as the hp psc 2410 into a network capable printer? |
_lilmic_ (10271) |
| 491875 |
2006-10-16 20:34:00 |
Buy a print server? A quick google should bring up all relevant infomation. |
Pete O'Neil (6584) |
| 491876 |
2006-10-16 22:01:00 |
Have you tried sharing the printer? |
andrew93 (249) |
| 491877 |
2006-10-16 22:29:00 |
dse sell ip print servers plug into the lpt port then plug in your ethernet cable to that |
beama (111) |
| 491878 |
2006-10-17 00:48:00 |
A multifunction printer might not deliver all its functions, and its management software might not work properly when it is used as a network printer. The results of this Google (www.google.co.nz/search?hl=en&q=hp+psc+2410+network&meta=) search might be worth looking at. |
Graham L (2) |
| 491879 |
2006-10-24 07:41:00 |
Get a HP Jet Direct. That will allow you to use the printer on a network. ie plug the ethernet into the Jet Direct and your PC Network card and the parallel cable from the Jet to the Printer. About $80 - $90 second hand (Core Technologies have them) |
muzza (7316) |
| 1 |
|