| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 74892 | 2006-12-09 02:29:00 | DP65LT Mother Board install ? | rd400f (11594) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 505344 | 2006-12-09 06:39:00 | Hi Speedy Gonzales ...thanks for confirming that. Even though I can see that the Led on the board is lit and the fans run I still dont get any leds..power or HD..on the front of the case..no beeps from the board and nothing on screen. Thanks Richard |
rd400f (11594) | ||
| 505345 | 2006-12-09 06:51:00 | Switch the wires around. ie: If u put them on like this o o G R Switch them round so its like this o o R G And if this motherboard has an ATX 4 pin adapter on it, make sure the adapter from the power is plugged into it. Or it'll never work. |
Speedy Gonzales (78) | ||
| 505346 | 2006-12-09 07:10:00 | Hi Tryed them both ways and the 12v(2x2) connector is in. I will try some more reading tomorrow after I get back from my Drag racing. Thanks Richard |
rd400f (11594) | ||
| 505347 | 2006-12-23 23:31:00 | Hi I am back trying to get this mother board install to work. Does anyone know what voltage the Chassis 9-pin Front Panel Header pins have ? I want to check that the LEDs on my cases front panel work..I have shoved 6volts up them and saw nothing.Might they be 12 volts? Thanks Richard |
rd400f (11594) | ||
| 1 2 | |||||