| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 75435 | 2006-12-29 04:49:00 | CPU overclocking | Adrian23q (9593) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 510620 | 2006-12-29 04:49:00 | Hello, i recently bought a new cpu (AMD Sempron 3300+ 2.0ghz) and I tried overclocking it. This is the first time I've overclocked my cpu and i only raised my ghz to 2.25 is this normal? I only changed my FSB setting. because I've herd of people getting their 2.0 up to 2.6. cheers for any help Adrian.:) |
Adrian23q (9593) | ||
| 510621 | 2006-12-29 05:42:00 | Can somone please tell me how do i go about overclocking what do i do to to change the speed. im currently running a pc at 2.8ghz and have a dual core processor. | Hitech (9024) | ||
| 510622 | 2006-12-29 05:56:00 | I guess I am conservative but I view overclocking to be a bit like running a car engine at beyond the recommended RPM. It is a risking business (is it not?) that may take it's toll on hardware. | johnd (85) | ||
| 510623 | 2006-12-29 06:37:00 | Hello, i recently bought a new cpu (AMD Sempron 3300+ 2.0ghz) and I tried overclocking it. This is the first time I've overclocked my cpu and i only raised my ghz to 2.25 is this normal? I only changed my FSB setting. because I've herd of people getting their 2.0 up to 2.6. cheers for any help Adrian.:) a good choice for a low end cpu, you need to raise the voltage of the cpu core by a little otherwise overclocking will not be stable |
JUST INSANE (6682) | ||
| 510624 | 2006-12-29 06:54:00 | its not very risky if you read more about it and you get more for what you pay for | JUST INSANE (6682) | ||
| 510625 | 2006-12-29 08:38:00 | Here is a Link (forums.anandtech.com) to a thread on how work out the ceiling of your overclock. | SolMiester (139) | ||
| 510626 | 2006-12-29 08:42:00 | To overclock you need to go into the bios during booting normally push DEL key | JUST INSANE (6682) | ||
| 510627 | 2006-12-29 11:45:00 | Adrian, The Sempron 64 3000+ (1.8ghz) can go to 2.2ghz with out a voltage change normally, so yours should go a bit higher before it needs a voltage change. Also you should probably get a 3rd party fan with cooler, I don't know what specific model would be good for that but I know Zalman make good coolers+fans. @Johnd; It's more like taking a car and tuning the engine, and adding preformance parts. For example the 4L I-6 engine in the Ford Falcon AU comes standard with 210bhp, but with tuning and performance parts can push 300bhp (400bhp if you had expensive mods like a High stall converter and Diffs). Just like how a CPU at, say 3ghz can go to ~3.6 with a bit of Overclocking bur can go even higher with more careful overclocking. |
Faded_Mantis (79) | ||
| 510628 | 2006-12-30 02:42:00 | what you tried was a 25% overclock thats a hell of a lot.....you need to start small and work up till it dont want to go then back off a little also watch the system temps ....and you need ram that will handle it.....cheap ram doesn't overclock too well.... | drcspy (146) | ||
| 510629 | 2006-12-30 05:09:00 | @Johnd; It's more like taking a car and tuning the engine, and adding preformance parts. For example the 4L I-6 engine in the Ford Falcon AU comes standard with 210bhp, but with tuning and performance parts can push 300bhp (400bhp if you had expensive mods like a High stall converter and Diffs). Just like how a CPU at, say 3ghz can go to ~3.6 with a bit of Overclocking bur can go even higher with more careful overclocking. So can I overclock my Primera engine just by changing a few system settings. :waughh: |
dolby digital (5073) | ||
| 1 2 3 | |||||