| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 140498 | 2015-10-23 03:26:00 | Burglar alarm on VOIP | berryb (99) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1410345 | 2015-10-23 03:26:00 | Does anyone have their burglar alarm working reliably over a VOIP connect using an ATA? I have heard with some VOIP companies seems to work but I do not know how reliable this is or who they are. VOIP companies all seem to have a disclaimer in their terms that they are a voice supplier and do not guarantee burglar alarms etc. I have just changed to VOIP on my line the alarm is on and is no longer communicating correctly. Before I spend time changing settings in the ATA and testing I thought I’d ask here first. If it doesn’t work I’ll put a Radionet module or the like on the alarm. Cheers |
berryb (99) | ||
| 1410346 | 2015-10-23 03:57:00 | Yeah most will work provided your connection is stable, minimal jitter, minimal latency, minimal jitterbuffer. Use g711 as a codec and most are just fine. | Chilling_Silence (9) | ||
| 1410347 | 2015-10-23 04:07:00 | Depending on alarm and company if monitored, an ip solution may work out better. | psycik (12851) | ||
| 1410348 | 2015-10-23 11:11:00 | Changed to G711 and configured Audio settings for NZ and worked straight away. I should have spent the time and configured properly when I installed it. Cheers |
berryb (99) | ||
| 1410349 | 2015-10-23 23:35:00 | Once slight issue, if the power is off or your router is unplugged VOIP will be down. When I go fibre I plan to put a small UPS in to power it. |
dugimodo (138) | ||
| 1410350 | 2015-10-24 10:44:00 | I have 3 UPS running server, PC, router etc so covered on this one. Even have a gen set as well :clap:clap:clap | berryb (99) | ||
| 1 | |||||