Forum Home
Press F1
Thread ID: 140658	2015-11-22 05:16:00	Help me: What do you want in a router? 2 1/2yrs later I'm finally doing it!	Chilling_Silence (9)	Press F1

Post ID	Timestamp	Content	User
1411710	2015-11-22 05:16:00	Hi all, So I'm sure you'll remember this from a couple of years back: www.nbr.co.nz pressf1.pcworld.co.nz Like the NBR article mentions: He noted one Geekzone wishlist feature - rack mounting - ran counter to the desire of most Telecom customers for a small, discreet modem that can be easily hidden away. Still, while acknowledging many were not practical for middle New Zealand households, he liked a lot of the Geekzone ideas, and rated the the project a success. Well, I don't. I think it was a huge abysmal failure that never amounted to anything at all. I'd like to say: I told you so, to Mauricio. Anyway, a combinatino of time, professional growth, technology and more, has allowed me to do just this, and I'm already part-way through it. So, I want to know: What do you think an "average Joe Bloggs" would want to see in a router? I'm talking let's design something for the 95% here, rather than Geekzone designing for the "5%". This is going to be cut down, simple. I'm going to carry on with my original mock-up images ( imgur.com ) which shows some basic stats right away without logging in. - I'm going to only show basic WiFi settings, so you can set the SSID, Key and if you're going to use WPA or WPA2. - I'm going to hide most LAN settings and more - I'm going to provide an "overview" page that will show how much data is going in and out each "port" at any given time (So you can see WiFi has 55mbps transmitted over it at the time you loaded up the page) - I'm designing it with Cellphone / Tablet for administration first and foremost :pf1mobmini: I'm after some more ideas, what are some of the basic things that would be helpful? What would you think would be helpful? What would your grandparents find useful? Another thing I'm contemplating is writing a basic "App" for Android / iOS that you can use that'll help you get on to the routers UI. So yeah whilst I'm not going to "throw the kitchen sink" at this project, I'd love some ideas from members here on things that would make their life easier, especially given a number of you regularly do remote tech support for family / friends. Cheers Chill.	Chilling_Silence (9)
1411711	2015-11-22 05:30:00	In fact, here's another plot twist: What are some things you _don't_ want to see? For example, I don't think a router needs to be showing things like: - Custom / static routes - UPnP Settings - DNS Proxy settings - Subnet Mask settings (Really, how many people set theirs to anything aside from 255.255.255.0?) What else? :D	Chilling_Silence (9)
1411712	2015-11-22 05:49:00	Set time limits for any device easily. Easy setup of static ips	gary67 (56)
1411713	2015-11-22 08:11:00	Is it all possible to have a significant LED that is labelled "Hey man, I've lost connection to the ISP", rather than trying to remember which light is which and what cadence etc. Then in the perfect world it goes into automatic attempts to reconnect and stabilise. Oh and also on the occasions that my connection goes haywire and I manually restart my TP Link modem it is never fixed until I do a soft boot and it's then ok. Crazy and it doesn't bother me too much but not what I would expect for a new one. Then maybe moving to the 5% (?) but ability to report on devices that have connected recently. Just ideas	Ofthesea (14129)
1411714	2015-11-22 08:57:00	Set time limits for any device easily. Easy setup of static ips Hmm OK so: - Time limits (As in, you're only allowed internet between 3PM and 9PM) - Bandwidth limits (Daily / weekly / monthly) - Device naming / IP Address assigning I really like that last one, yes I think that's a fantastic idea! That's gotta be one of the most bloody annoying things, never knowing what device is what. Is it all possible to have a significant LED that is labelled "Hey man, I've lost connection to the ISP", rather than trying to remember which light is which and what cadence etc. Then in the perfect world it goes into automatic attempts to reconnect and stabilise. Oh and also on the occasions that my connection goes haywire and I manually restart my TP Link modem it is never fixed until I do a soft boot and it's then ok. Crazy and it doesn't bother me too much but not what I would expect for a new one. Then maybe moving to the 5% (?) but ability to report on devices that have connected recently. Just ideas OK excellent, I like these: - Online status (At this stage I'm only going to be focusing on UFB, or on routers for in combination with the likes of a DrayTek DV130) Thinking more about this, I think a big tick box to say "Yes, you're online" or "No, you're not" sorta thing... - Recently connected devices, I think this could also be useful, perhaps to see how long something has been online. I'm thinking like a status / overview page, and this could tie in quite well with having the ability to name devices. It'd show the devices name, such as "Bobs iPhone", how long it's been connected for, perhaps it's WiFi signal strength, and maybe even the IP address. Yes, I think those are all fantastic ideas! Keep 'em coming! :D	Chilling_Silence (9)
1411715	2015-11-22 18:53:00	What do you think an "average Joe Bloggs" would want to see in a router? Simplicity. Reliabilty. A simple basic interface, really simple - showing the username/password bit, wifi password, connection (or not) info and that's pretty much it. In plain english. Obviously there should be a more detailed section, but Basic/Advanced perhaps and the basic really is. Helped heaps of people set up over the phone and they all find it confusing and too complicated. Even just finding the right section.	pctek (84)
1411716	2015-11-22 19:46:00	What pctek said. In fact the general public average user type doesn't want to fiddle with the router settings at all, ever. Something that for almost all users can be unboxed, plugged in, and forgotten about. That's the holy grail of consumer appliances. When it does become necessary to configure things you want all the common simple settings laid out as simply as possible, and if there was an explanation available of what the setting was for even better. For the more technically minded the advanced features still need to be available, but generally those people can figure it out and don't need so much help. For me personally I've often considered a dual device setup with gargoyle on one of them but could never be bothered setting it up (or spending the money) and opted instead for an all in one device that just does the job and is close to my Ideal, forget the model it's a TP-Link VDSL modem/router with dual band Wi-Fi and 3 Aerials. Something on the hardware side, almost every router I've owned ran hot and didn't tolerate being placed somewhere warm or where direct sunlight might hit it. Many people won't figure out why a modem failed, just decide it's rubbish and try a different one. So based on that I think routers need better cooling and a note to avoid direct sunlight on them. Summary; Simple to set up and use (Just works) Reliable If it has Wi-Fi speed and performance matter Advanced features available for those who need them, not seen by those who don't Cooling?	dugimodo (138)
1411717	2015-11-22 22:23:00	Simplicity. Reliabilty. Exactly! I agree. A simple basic interface, really simple - showing the username/password bit, wifi password, connection (or not) info and that's pretty much it. In plain english. Obviously there should be a more detailed section, but Basic/Advanced perhaps and the basic really is. Helped heaps of people set up over the phone and they all find it confusing and too complicated. Even just finding the right section. Yeah I feel your pain, which is kinda what prompted me to further investigate this again recently... I like the idea of having a Basic / Advanced, but even the Advanced can probably be kept to a minimum. What pctek said. In fact the general public average user type doesn't want to fiddle with the router settings at all, ever. Something that for almost all users can be unboxed, plugged in, and forgotten about. That's the holy grail of consumer appliances. When it does become necessary to configure things you want all the common simple settings laid out as simply as possible, and if there was an explanation available of what the setting was for even better. Yeah OK thats some good advice, so out-of-the-box works with WiFi on... For the more technically minded the advanced features still need to be available, but generally those people can figure it out and don't need so much help. For me personally I've often considered a dual device setup with gargoyle on one of them but could never be bothered setting it up (or spending the money) and opted instead for an all in one device that just does the job and is close to my Ideal, forget the model it's a TP-Link VDSL modem/router with dual band Wi-Fi and 3 Aerials. I have the TD-W9980 TP-Link behind me, looked at putting OpenWRT on it but apparently you have to flash it by pulling it apart and using the serial console :-/ Something on the hardware side, almost every router I've owned ran hot and didn't tolerate being placed somewhere warm or where direct sunlight might hit it. Many people won't figure out why a modem failed, just decide it's rubbish and try a different one. So based on that I think routers need better cooling and a note to avoid direct sunlight on them. Yeah for sure. The TL-WR1043ND I've been using as "test" hardware so far isn't too bad in that respect. Will be looking at other hardware too... Summary; Simple to set up and use (Just works) Reliable If it has Wi-Fi speed and performance matter Advanced features available for those who need them, not seen by those who don't Cooling? Right, so the WiFi speed / performance is very much going to be a combination of the hardware and the firmware. It's some food for thought. It sounds like a few "advanced" features will be needed, kept separate from the basics... But what sort of "Advanced" stuff are we talking about? What do you reckon would fall under that category? I'll grab some screenshots of what I've got so far and post them shortly...	Chilling_Silence (9)
1411718	2015-11-22 22:37:00	So we start with the home page: 6829 The Router Overview: 6830 I think even having DNS there is possibly too much. Eventually I think a few extra things like "You have X devices connected" which could then further drill down to show you who's connected via WiFi / cable etc could be cool What other stuff would be handy in there? The "Network throughput" page is still a work-in-progress. It does what it says but it's ugly and convoluted. Internet Access page: 6827 I think having the "hints" in the background may be a little too much? Thoughts? WiFi Settings: 6831 Behind it, it asks for your WiFi "password" as well, but that screenshot didn't get uploaded coz PF1 limits you to 5 attachments per-thread? LAN Settings (Under Advanced): 6828 I'm _contemplating_ allowing DNS to be specified in there too, but not sure. Thinking I could also put in the ability under "Advanced" to label each device. All devices will get the same IP via DHCP each time, so that's not a problem, but to actually *label* them I think could be helpful in combination with some other basic functionality, traffic prioritization etc Anyways I'm hoping that giving you a bit of a glimpse of what I've got going already (It's all working and functional) that you might be able to provide me with even more, specific feedback :) Thanks again thus far all, you've been great!	Chilling_Silence (9)
1411719	2015-11-22 23:50:00	Awesome!!!	wratterus (105)
1 2 3