Forum Home
Press F1
Thread ID: 77069	2007-02-25 21:59:00	HP NetServer LC 2000	aidanmaz (7180)	Press F1

Post ID	Timestamp	Content	User
528138	2007-02-25 21:59:00	Yesterday my father dragged (literally) home a old server from his work they were chcuking out and said i could have it to play on. Its HP NetServer LC 2000, 256MB RAM, 600 Mhz PIII, SCSI with 3 x 18.2 GB hDDs (acting as one 33.9GB drive. I put windows server 2003 enterprise SP1 on there, but i was how do i break the RAID config so i can have seperate drives? i already put another 200gb ide drive in there but i want the SCSI to be seperate drives, i dont really need fault tolerence, not knowing anything about SCSI, how would i do this. On bootup there are many different "press (insert button combo)" to enter various setups. i have been through them all and cannot find anything to break the RAID. The server has those hot swappable scsi rack thingys too. Any help would be great. Cheers	aidanmaz (7180)
528139	2007-02-25 22:55:00	Hi, you have to go into the RAID card BIOS on boot up, it should come up with a message press " " to enter BIOS (remember the BIOS on the RAID controller, not the system). Then you break the raid array and create new drive arrays	SolMiester (139)
1