| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 78035 | 2007-03-31 11:12:00 | The dreaded "This device cannot start. (Code 10)" | nicnz (2273) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 537305 | 2007-03-31 11:12:00 | Hi, I'm trying to get a new Serial ATA / Parallel ATA PCI Card working with my onbaord SATA controller. I'm just using them (or want to use them) to control JBOD. My problem is that as soon as I attach a disk to the PCI card, it seems to no longer detect the onbard controller (or at least it no longer shows up in the boot up), and windows shows the controller with the code 10 error. Is there some IRQ setting that I might need to change on the M/B? Onboard is the VIA SATA RAID Controller, and the PCI Card is based on the VIA VT6241 RAID Controller. Motherboard is A7V600. Cheerr, Nic |
nicnz (2273) | ||
| 537306 | 2007-04-01 05:19:00 | Read here: forums.viaarena.com |
pctek (84) | ||
| 1 | |||||