Forum Home
Press F1
 
Thread ID: 78588 2007-04-21 06:15:00 Up-grading a CPU meg_h_nz (6960) Press F1
Post ID Timestamp Content User
542899 2007-04-27 22:57:00 make sure not to touch the thernal paste with your fingersWhy not? It's the easiest way to put a very light smear onto the chip. Greg (193)
542900 2007-04-27 23:48:00 have you got all the latest patches (if any) available for the Sims game, might help

been there, done that
meg_h_nz (6960)
542901 2007-04-27 23:51:00 been there, done that What about the motherboard drivers? The_End_Of_Reality (334)
542902 2007-04-27 23:51:00 It would seem you're getting far too close for comfort judging by previous posts.......

Too close to what?
I have been told it is standard practice to blow the dust out of the case.
What do you base this advice on?
meg_h_nz (6960)
542903 2007-04-27 23:52:00 What about the motherboard drivers?

done that too.
meg_h_nz (6960)
542904 2007-04-28 00:40:00 Just been reading the end of this thread and wondered perhaps if the pc is crashing?, it could be the PSU. 350w isnt exactly very powerful and P4 are very power hungry. Can you please post the rating of the PSU which should be listed on the side of the unit.
all values pls.
SolMiester (139)
542905 2007-04-28 02:06:00 Just been reading the end of this thread and wondered perhaps if the pc is crashing?, it could be the PSU. 350w isnt exactly very powerful and P4 are very power hungry. Can you please post the rating of the PSU which should be listed on the side of the unit.
all values pls.

sorry, the side of what unit?
meg_h_nz (6960)
542906 2007-04-28 02:31:00 sorry, the side of what unit? on the side of the PSU, you will see a table on it when you open up the case (the PSU is towards the back of the case and up the top) The_End_Of_Reality (334)
542907 2007-04-28 03:15:00 www.newegg.com
this is the same model
meg_h_nz (6960)
542908 2007-04-28 03:24:00 Sorry, I found this link is the actual FSP model.
www.ncix.com
meg_h_nz (6960)
1 2 3 4 5 6 7 8 9