| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 78852 | 2007-04-30 08:28:00 | Port-forwarding | killa275 (11593) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 545647 | 2007-04-30 08:28:00 | Hi guys i have just brought a new dlink 502t modem an have been trying to open my ports on this computer.But am now confused at what i am doing i went to portforward.com an have read what others have posted here but i am still confused can anyone walk me through it please.or simpelfy it :help: :help: :help: :help: | killa275 (11593) | ||
| 545648 | 2007-04-30 08:57:00 | How far have you got? Have you got into your router/modem yet? Which should be 10.1.1.1/ Username: admin p admin |
radium (8645) | ||
| 545649 | 2007-04-30 09:02:00 | How far have you got? Have you got into your router/modem yet? Which should be admin p/w:" target="_blank">10.1.1.1/ Username: admin p admin yes i have just didnt no what i was doing so i stoped:( |
killa275 (11593) | ||
| 545650 | 2007-04-30 09:30:00 | Ok, Now that I know where your at I can help you. Click on Advanced (at the top of page) Then Click Virtual Server (left hand side of page) Then in Catagory Click on User Then Click Add type a name for your rule If it's a TCP port leave it as TCP Then Type in the port address 3 times into Port Start, Port End & Port Map. So all the entries will have the same port number. Next Click on Appy Then you will be back to your Virtual Server window. Click on User & highlight the port rule you just made. Then in the middle of the page between the 2 boxes click Add Click Apply. Now to save this go to Tools (top of page) Then go to System on left of page Then Click Save & Reboot. Your modem will reboot and your new port rule/forward will be saved. If you get stuck, let us know. |
radium (8645) | ||
| 545651 | 2007-04-30 09:52:00 | dosent seem to have open | killa275 (11593) | ||
| 545652 | 2007-04-30 10:03:00 | Did you manage to forward the port thou? What programme are you trying to open up the port for? What AV & Firewall are you running. Configure your Firewall for the same ports. When I use to have Norton, It's Internet worm protection use to stop my ports from forwarding. |
radium (8645) | ||
| 545653 | 2007-04-30 10:36:00 | Did you manage to forward the port thou? What programme are you trying to open up the port for? What AV & Firewall are you running. Configure your Firewall for the same ports. When I use to have Norton, It's Internet worm protection use to stop my ports from forwarding. got the port going but utorrent stayed green for 5 mins then whent red whitch means no incoming connections.I am using avg for my anti virus an no firewalls that i no of |
killa275 (11593) | ||
| 545654 | 2007-04-30 10:49:00 | got the port going but utorrent stayed green for 5 mins then whent red whitch means no incoming connections.I am using avg for my anti virus an no firewalls that i no of Click on the icon. I have the same setup and have forwarded the port on the same router. Sometimes it isn't a green light, but everytime you go to the portforward website it always says that the port is forwarded correctly. (That is if your setup is working like mine) |
JohnstonDJ (12197) | ||
| 545655 | 2007-04-30 10:59:00 | Yes Johnstons Right. I use uTorrent also. Just use the port checker under the speedtest guide. in uTorrent As long as that says your port is open it will be fine. |
radium (8645) | ||
| 545656 | 2007-04-30 11:03:00 | Click on the icon. I have the same setup and have forwarded the port on the same router. Sometimes it isn't a green light, but everytime you go to the portforward website it always says that the port is forwarded correctly. (That is if your setup is working like mine) yeah mine dont say that aye just says it is not open i got some pics if thatwill help img176.imagevenue.com img159.imagevenue.com img102.imagevenue.com Whats a good port to use.Thanks for helping me guys |
killa275 (11593) | ||
| 1 2 3 | |||||