| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 79641 | 2007-05-27 09:08:00 | Aver TV / Recording Software | JaceKiwi (2561) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 553535 | 2007-09-22 00:36:00 | I've tried downloading the file but after I enter name, age and country nothing happens. | JaceKiwi (2561) | ||
| 553536 | 2007-09-22 02:01:00 | I found the previous file (PowerCinema) on the computer and installed it. But it only finds TV1 and TV2. How do I manually add the other channels (In AverTv I just typed the channel number regardless to what was in settings (6/8/12/59). |
JaceKiwi (2561) | ||
| 553537 | 2007-09-22 02:09:00 | Click on the configuration or the TV con in it and have a look. Hopefully you've connected an external aerial. It'll give u a better signal. Or else u may not get the UHF channels. Altho it maybe better if u get Mediaportal, if u havent paid for Powercinema. Since it'll run out sooner or later. |
Speedy Gonzales (78) | ||
| 553538 | 2007-09-22 11:49:00 | I've tried many programs with my old BT848 TView2000 card. The original software had very limited capture abilities (no scheduler, no compression). I finally settled on a free application http://www.kastortv.org/ It's very good, does most everything I want, has a good scheduler and I can compress the video via Xvid codec. I also compress the audio using Lame MP3 codec. I do all the compression in one pass, but you need good hardware to do this. The only trouble I have with the K!TV program is that it's a French application and some of the OSD messages are in French! :) | Rod J (451) | ||
| 553539 | 2007-09-22 21:56:00 | MediaPortal does not find any TV/capture capture cards. | JaceKiwi (2561) | ||
| 553540 | 2007-09-22 22:02:00 | Sounds like the tuner is 1/2 dead, or the drivers arent installed / or maybe corrupt. | Speedy Gonzales (78) | ||
| 553541 | 2007-09-22 22:28:00 | I finally settled on a free application http://www.kastortv.org/ It's very good, does most everything I want, has a good scheduler and I can compress the video via Xvid codec. I also compress the audio using Lame MP3 codec. I do all the compression in one pass, but you need good hardware to do this. :) I've installed KTV but the only source that works is Composite. Also I haven't found the scheduler. I know the tuner works because WinDVR had reception but it lost the schedule when I rebooted. |
JaceKiwi (2561) | ||
| 553542 | 2007-09-22 22:51:00 | Also, KTV does not appear to support UHF channels. | JaceKiwi (2561) | ||
| 553543 | 2007-09-22 23:26:00 | Found the scheduler: Enabled Zoomout plug in. How do I use the compression - particularly MPG recording. Also I can see the picture on the VHF channels on SP1 but still nothing on the SP2 install. | JaceKiwi (2561) | ||
| 553544 | 2007-09-23 01:37:00 | Install on SP2 working but with same problems as SP1. No compression (MPG/MP3) and there is reverbiration on sound when recording. | JaceKiwi (2561) | ||
| 1 2 3 | |||||