| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 141669 | 2016-02-02 19:56:00 | Display No Signal and USB ports not working | jbwoff22 (17444) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1415355 | 2016-02-02 19:56:00 | Hey guys, I am a new PC builder. I built my first rig about 6 months ago and everything has been going great except now my computer boots, but nothing displays on the monitor. I've resat the ram, unplugged everything and plugged it in again, changed PCE ports for the graphics card, removed the CMOS battery but my issue persists. My rig consists of 650W Solid Gear Power Supply ASUS M5A97 R2.0 Motherboard Radeon R9 270 Windforce Graphics Card AMD FX Processor Black Edition 2X8gb GSkill Ripjaws X RAM sticks So heres the details: 1. My computer turns on, a hear one long continous beep and my DRAM_LED light is solid red 2. I tried resetting ram but issue persists 3. My graphics card fan is not spinning, but when I move it into the second PCE slot it finally spins but still no display on my monitor 4. When I turn the on switch on my computer the keyboard lights flicker, but when i actually power on the computer the keyboard never turns on. Can someone please walk me through the proper troubleshooting steps and help me solve this issue. Respectfully, Justin |
jbwoff22 (17444) | ||
| 1415356 | 2016-02-02 20:25:00 | The beep and LED indicate that RAM is the issue. You could try with just one stick, if no change then try the other one. Do this with all slots in case one is faulty. You could also try resetting the CMOS. www.manualslib.com |
KarameaDave (15222) | ||
| 1415357 | 2016-02-02 20:46:00 | What CPU is it ? | Speedy Gonzales (78) | ||
| 1 | |||||