Forum Home
Press F1
 
Thread ID: 80381 2007-06-20 23:09:00 VPN help hcl (10925) Press F1
Post ID Timestamp Content User
561135 2007-06-20 23:09:00 I'm trying to set up a VPN to a Linksys BEFVP41 VPN router using this (www.dslreports.com) guide, but it isn't working. The router logs show the connection, but the key exchange times out.


2007-06-21 10:10:07 IKE[51] Rx << MM_I1 : 219.89.206.174 SA, VID
2007-06-21 10:10:07 IKE[51] Tx >> MM_R1 : 219.89.206.174 SA
2007-06-21 10:10:07 IKE[51] ISAKMP SA CKI=[de0ff554 5e000001] CKR=[4cdd7578 d0bfaee1]
2007-06-21 10:10:07 IKE[51] ISAKMP SA 3DES / MD5 / PreShared / MODP_1024 / 14400 sec (*14400 sec)
2007-06-21 10:10:32 IKE[51] Rx << MM_I1 : 219.89.206.174 SA, VID
2007-06-21 10:10:32 IKE[51] Tx >> MM_R1 : 219.89.206.174 SA
2007-06-21 10:10:32 IKE[51] ISAKMP SA CKI=[de0ff554 5e000001] CKR=[e7d2f037 7dfa7551]
2007-06-21 10:10:32 IKE[51] ISAKMP SA 3DES / MD5 / PreShared / MODP_1024 / 14400 sec (*14400 sec)

www.imagef1.net.nz

The VPN router has an IP address of 192.168.1.1 & is connected to a Dlink 402t ADSL router with DMZ & VPN passthrough enabled & block IKE disabled. The IP address of the dlink is 10.1.1.1

On the client side is a computer running XP pro & ssh sentinel 1.4, connecting through an old dynalink ADSL router, IP address 192.168.0.1
hcl (10925)
561136 2007-06-21 03:28:00 It would appear that the old ADSL router is to blame. It was still bugging me at lunch time, so I installed SSH Sentinel on my home computer & it had no trouble connecting to the VPN hcl (10925)
1