| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 80522 | 2007-06-26 06:46:00 | Please helap me i am getting this error | Venkat (12467) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 563176 | 2007-06-26 06:46:00 | i have a PC PentiumIII with 1G Hz speed. Installed 80GB HDD for one port as master.From the second port i installed SONY-DVD-RW as master and LG-CD-R as Slave. The primary Slave is free. in BIOS set up all the disks are displaying. when i start the PC i am getting the following error Pri Master:3-ACC ST380215 Ultra DMA Mode-5 S.M.A.R.T Capable but disabled. after few miutes Pri Slave Drive - ATAPI incompatable Press F1 to Resume.. can please help me |
Venkat (12467) | ||
| 563177 | 2007-06-26 07:01:00 | It says Primary Master has a Seagate drive on it which does not have S.M.A.R.T enabled, smart is a disk monitoring thing you can turn on in the BIOS. It finds a non-atapi drive on Primary slave probably because there isn't one. So change Primary Slave to NONE. |
pctek (84) | ||
| 563178 | 2007-06-26 07:16:00 | ya its a segate HDD with 80GB in bios setup Primary master is HDD and slave is not installed. Secondary maseter is SONY-DVD and slave is LG-CD-RD | Venkat (12467) | ||
| 1 | |||||