| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 81318 | 2007-07-23 23:26:00 | Setup D-Link Router to Telstra Cable Modem | Pazzin (5084) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 571946 | 2007-07-23 23:26:00 | Hi I recently got Telstra Cable and want to share it amongst other PC's in the house via a D-Link Router. I'm not quite sure what I have to do to setup the router and PC's as the modem uses a fixed Ip. If anyone can give some brief instructions that would be really helpful. |
Pazzin (5084) | ||
| 571947 | 2007-07-24 00:15:00 | Whats the model of the D-Link unit? | Pete O'Neil (6584) | ||
| 571948 | 2007-07-24 07:18:00 | Hi there It is a D-Link DI-704UP. Thanks - Paul |
Pazzin (5084) | ||
| 571949 | 2007-07-24 09:44:00 | I reckon it should just about work out of the box. Set up your workstations to be DHCP (receive an automatic IP address) and connect to the router/switch. | johnd (85) | ||
| 571950 | 2007-07-26 06:26:00 | Hi That's what I thought and set both to DHCP but then I get no connectivity so it doesen't seem to be picking anything up, have tried resets etc. Cheers - Paul |
Pazzin (5084) | ||
| 571951 | 2007-07-26 10:59:00 | I suggest that you temporarily set your workstations to a compatible static IP address to the router then use ping to test that you have basic connectivity. | johnd (85) | ||
| 1 | |||||