Forum Home
Press F1
Thread ID: 82177	2007-08-18 04:28:00	Raid Access Failure	Mcpisik (4924)	Press F1

Post ID	Timestamp	Content	User
582344	2007-08-18 04:28:00	Hi peoples! Just started getting this message when using fireworks, while trying to access some pictures from hard drive. "RAID Access Failure. Access failure: Critical error on disk HDT722525DLA380 (Port:SATA 2.1) Any ideas what the best move would be to help resolve this? Thanks!....	Mcpisik (4924)
582345	2007-08-18 04:39:00	I would check the cable see if its coming out or something.	Speedy Gonzales (78)
582346	2007-08-18 06:42:00	Is this error coming up on boot-up? What sort of RAID setup have you got? RAID 0, RAID 1, RAID 5? To me that error message means that one of the HDDs has starting failing, bad sectors or something. I would be replacing it as soon as possible if you have RAID 0 because if one drive dies you lose all data. RAID1 or 5 not so critical but still needs to be done pretty soon.	CYaBro (73)
582347	2007-08-18 06:46:00	Looks like Raid 0 Cyabro, its in his sig.	Speedy Gonzales (78)
582348	2007-08-18 06:53:00	Looks like Raid 0 Cyabro, its in his sig. Man I need to read posts properly :rolleyes: It also says its when they are using fireworks when trying to access pictures so it's not happening on bootup! Anyway, Mcpisik do you have the RAID ultiliy installed? These usually have some sort of error checking and/ or a log and it should tell you if there are any problems with the RAID.	CYaBro (73)
1