| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 82681 | 2007-09-04 09:48:00 | Wireless problem | Ninjabear (2948) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 587826 | 2007-09-04 09:48:00 | Hi Does anyone use Netgear modems that has built in wireless? I went to the configuration settings by typing http://192.168.0.1 I then went to wireless settings and ticked "Enabled wireless access point" but after rebooting the router.The computer couldn't detect any wireless network.I tried it on a laptop and it still couldn't detect any wireless network Did I forget something? |
Ninjabear (2948) | ||
| 587827 | 2007-09-04 09:51:00 | 1) How close is the computer and the router? 2) Is the router blinking all right? Can't think of anymore intelligent questions at the moment. Cheers :) |
Renmoo (66) | ||
| 587828 | 2007-09-04 09:54:00 | Click on Wireless Settings and check the following settings: Name (SSID): Either use the default (NETGEAR) or enter your own network name Region: New Zealand Channel: 11 Mode: G & B Tick both 'Enable Wireless Access Point' and 'Allow Broadcast of Name (SSID)', set the Security Option to 'WPA-PSK+WPA2-PSK' and enter a password for your wireless network (at least 8 characters) in the Network Key field. |
Safari (3993) | ||
| 587829 | 2007-09-04 09:54:00 | Did you save/apply the changes before restarting the router? | berryb (99) | ||
| 587830 | 2007-09-04 10:11:00 | 1) How close is the computer and the router? 2) Is the router blinking all right? Can't think of anymore intelligent questions at the moment. Cheers :) There are 4 lights The power light ,the tick light,some random upside down question mark light and a wireless light I think 1st light,3rd light and the 4th light is glowing The computer is 1m away from the router |
Ninjabear (2948) | ||
| 587831 | 2007-09-04 10:12:00 | Click on Wireless Settings and check the following settings: Name (SSID): Either use the default (NETGEAR) or enter your own network name Region: New Zealand Channel: 11 Mode: G & B Tick both 'Enable Wireless Access Point' and 'Allow Broadcast of Name (SSID)', set the Security Option to 'WPA-PSK+WPA2-PSK' and enter a password for your wireless network (at least 8 characters) in the Network Key field . All the settings are correct and are ticked With the security option . I don't think I should put a password as Im just testing it out to check if my friend's laptop which she bought today is working properly but my wireless isnt working |
Ninjabear (2948) | ||
| 587832 | 2007-09-04 10:20:00 | Did you save/apply the changes before restarting the router? yes I did |
Ninjabear (2948) | ||
| 587833 | 2007-09-04 10:21:00 | Under Router status it says Wireless Port Name (SSID) NETGEAR Region New Zealand Channel 11 Wireless AP Enabled Broadcast Name Enabled So...Any ideas why its not working? |
Ninjabear (2948) | ||
| 587834 | 2007-09-04 10:25:00 | When you click on wireless network connection on the taskbar and click view wireless network.Your suppose to see your modem name am I correct because it isn't coming up with anything | Ninjabear (2948) | ||
| 587835 | 2007-09-04 11:47:00 | Does the laptop have a switch to enable wireless networking? some do, when all else fails - read the user guide |
jinja_thom (4306) | ||
| 1 | |||||