| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 84127 | 2007-10-25 04:54:00 | Antec 900 Fans | mustang14a (11787) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 605135 | 2007-10-25 05:24:00 | You need to short the PSU and trick it into thinking theres a motherboard connected. Pretty sure you just need to run a wire between the green and black wires on the 24pin ATX header, would pay to Google and double check before you do it. | Pete O'Neil (6584) | ||
| 605136 | 2007-10-25 05:25:00 | ah i connected yellow and black wire on 20 pin atx header because there was no green, is that the wrong colour? | mustang14a (11787) | ||
| 605137 | 2007-10-25 05:31:00 | I would wait till you get the mobo and someone (if you dont know how to) installs it, and connects the wires etc. Or you may not have a PSU if you do something wrong now. |
Speedy Gonzales (78) | ||
| 605138 | 2007-10-25 05:33:00 | Doesnt matter about the psu, its an old one. | mustang14a (11787) | ||
| 605139 | 2007-10-25 05:52:00 | I'm not worried about the PSU, you could blow something up, inc the house! | Speedy Gonzales (78) | ||
| 605140 | 2007-10-25 06:00:00 | thanks for your help it working now | mustang14a (11787) | ||
| 605141 | 2007-10-25 06:28:00 | It is not smart to play with a PSU if you do not know what you are doing, yellow cables in all the PSUs I have here mean +12VDC and if you connect one of these to the black (ground) it shorts the PSU and is not good for it. That said I have got a PSU running here without a mobo, by shorting two pins on the 20 pin mobo connector. |
The_End_Of_Reality (334) | ||
| 1 2 | |||||