| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 84348 | 2007-11-02 03:41:00 | Job control | kjaada (253) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 607611 | 2007-11-02 03:41:00 | Have two linux OS's and recently am not able to run live CDs the error says /bin/sh:can't access tty:job control turned off |
kjaada (253) | ||
| 607612 | 2007-11-02 04:01:00 | I found a reference that said it could be a DEbian problem and booting with a non deb live CD could fix it but DSL live cd booted ok and the problem with my kubuntu live cd remains. |
kjaada (253) | ||
| 607613 | 2007-11-02 04:24:00 | That error message might be one error message, and one information message: something like /bin/sh: can't access tty job control turned off if it were formatted nicely. ;) If it's a live CD, there's probably nothing you can do to fix it. When you boot from a CD, there is no OS code in the computer until it is loaded. And thats all on the CD. :cool: It might be a problem with an unusual keyboard ... say a cordless one, which doesn't "exist" for an OS until its driver is loaded. But that's just a guess. If it happens with two different OS live CDs, it might even be a good guess. :thumbs: |
Graham L (2) | ||
| 607614 | 2007-11-02 06:23:00 | As part of the same problem,when loading Klikit OS it stops at about 30% and says press cntrl D to proceed and then all is normal.My other PCLOS OS loads and performs as normal.So I would guess it is not the disk or keyboard. |
kjaada (253) | ||
| 607615 | 2007-11-02 06:45:00 | This probably means it's failing to boot for some reason, and dropping you to busybox. Busybox does not have multitasking abilities. | Erayd (23) | ||
| 1 | |||||