Forum Home
Press F1
 
Thread ID: 85119 2007-11-30 03:39:00 mobo and graphics bluezone (12434) Press F1
Post ID Timestamp Content User
616671 2007-11-30 03:39:00 Hi there I have a ABIT IC7-G mobo it has not got a onboard VGA. I have the ASUS A9550GE/TD graphics card installed in the AGP slot. power on and everthing starts up and fans go and that but no screen this is the 1st install. Need help. :rolleyes:

Update: Also running 2.5gb of ram Intel Coleron D 2.66ghz Socket 478. PCI modem, PCI tv capture card. 80gb IDE hdd, IDE DL DVD drive. also have 4 other hdds still to go in it but got to get it running 1st
bluezone (12434)
616672 2007-11-30 03:44:00 Does the machine boot up without the AGP card using the onboard graphics? CYaBro (73)
616673 2007-11-30 03:47:00 Hasnt got a onboard VGA plug. This is the mobo: s206.photobucket.com

s206.photobucket.com

The Ram im using: s206.photobucket.com

The cooler: s206.photobucket.com
bluezone (12434)
616674 2007-11-30 03:48:00 Yea sorry didn't read your post correctly :D

I would start by removing all cards etc and unplugging all HDDs / optical drives and just trying the board, PSU, RAM and graphics card to see if you get anything.
CYaBro (73)
616675 2007-11-30 03:59:00 Ok tryed that only mobo and grahics card and one stick of ram no hdd or cd or other cards. and still no screen light up. bluezone (12434)
616676 2007-11-30 04:02:00 One reason why it wont turn on is some mobos support either 1.5v or 3.3v AGP cards.

If its the wrong voltage, what youre seeing can happen (it wont turn on).

I know this applies to ASUS mobos, it says it in the manual.

I would check what voltage the AGP port supports, and what the voltage of the AGP card is.

It can actually fry the AGP port, if its the wrong voltage.
Speedy Gonzales (78)
616677 2007-11-30 04:03:00 Also try another Power SUpply if you have one handy.

Almost forgot, have you remembered to connect the extra 4-pin power connector to the mainboard that provides the power for the CPU?
Looking at the photos you provided, it is right next to the first RAM socket on the right.
CYaBro (73)
616678 2007-11-30 04:24:00 OK Power is all connected and I cleared the CMOS. The manual says 1.5v and 0.8v AGP cards do not use 3.3v. Can take 4x or 8x also can do AGP pro 50 cards but mines not. Dont no what the volts is on the graphics card.

Update: Power supply is ok as i had it going in this before mobo change and its a very new PSU.
bluezone (12434)
616679 2007-11-30 04:27:00 www2.abit.com.tw

Update: The fan on the graphics card is spinning. Still no sceen im just looking up the graphics card on net to see the volts it is.
bluezone (12434)
616680 2007-11-30 05:04:00 Graphics card is the 256mb model not the 128mb thats got no fan. Still havent found out the volt of it. bluezone (12434)
1 2