| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 85484 | 2007-12-11 21:04:00 | WinXp repair | NZHawk (4093) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 620368 | 2007-12-11 22:22:00 | I am going to sign off on this one and send the computer back to the supplier / manufacturer. Many thanks to those who contributed input however limited & helpful. |
NZHawk (4093) | ||
| 620369 | 2007-12-11 22:34:00 | hm.........hokay well good luck .........btw what does : diagnostics card I have gave a code 25 that code mean ? and have you tried resetting the bios to defaults ? |
drcspy (146) | ||
| 620370 | 2007-12-11 23:00:00 | Many thanks to those who contributed input however limited & helpful . Geeee - go out on a job come back and given up already within a couple of hours -:groan: Oh well - the limited suggestions cant be turned into more helpful ones if only part of the information is supplied I guess . Good luck on getting it repaired . |
wainuitech (129) | ||
| 620371 | 2007-12-11 23:14:00 | 5 . Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP . No "R" is available; That happens when either not enough of Windows is intact for it to be repaired or it doesn't see an O/S at all . |
pctek (84) | ||
| 620372 | 2007-12-11 23:17:00 | Diagnostic Card PC Analyzer Version Error Code – 25 AMI (25)Interrupt vector initialization done. Going to read Input port of 9042 for turbo switch(if any).Going to read I/O port of 8042 for turb o switch(if any). Award (25)Enable slots 5;Initialize slot 5.Test extended memor y. Compaq (25)Test diskette subsystem. Phoenix&Dell (25)[Beep]=none interrupt vector loading in-progress. Not that it helps much lol |
bevy121 (117) | ||
| 1 2 | |||||