Forum Home
Press F1
 
Thread ID: 142482 2016-07-09 19:29:00 My PC is connected through erthenet cable but i have not access to the internet. Kostas (17481) Press F1
Post ID Timestamp Content User
1422890 2016-07-10 00:33:00 Speedy Gonzales,

DUDE you are a FRICKING ACE. I opened the IPV4 settings and for some reason the Dynamic Host Configuration Protocol (DHCP) was disabled and the "Use the following IP address" was selected i changed that and it auto fixed it self. Man you cannot believe how much i appreciate the time you spent on my thread....

A billion times THANK YOU!!! :) ;) xD
A thousand times THUMBS UP (y)

I hope i can help you back one day!
Kostas (17481)
1422891 2016-07-10 02:19:00 Sweet good to hear that fixed it ! :) Speedy Gonzales (78)
1422892 2016-07-10 04:52:00 Still weird that 192.168.1.100 wasn't OK given that the gateway is 192.168.1.1.

Anyway, good you are going again.
linw (53)
1422893 2016-07-11 00:55:00 linw,

I ran ipconfig again now that it's fixed and the results are:
IPv4 address: 192.168.2.6
Subnet mask: 255.255.255.0
Default Gateway: 192.168.2.1
I'm telling you just in case you figure something out on what was happening before.
And Thanks for the Help asss well mate!
Kostas (17481)
1422894 2016-07-11 03:47:00 Only the last number of the IP address can be different, however that happened the difference between .2.xxx and .1.xxx was the problem. dugimodo (138)
1422895 2016-07-11 10:14:00 Ah, yes, so the gateway was set to xxxx.2.1

Cheers.
linw (53)
1422896 2016-07-12 18:20:00 I often try Disable Network Connection then Enable Network Connection. Digby (677)
1 2