| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 87031 | 2008-02-05 05:19:00 | Home network settings for Zone Alarm Free | Digby (677) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 637632 | 2008-02-05 05:19:00 | Hi Guys I have installed Zone Alarm Free as my firewall, But I have had to re-install it and now need to know how to enter the settings for a three network machine. Can anyone point me to a tutorial. Do I enter my ISP adress or my network card settings. Regards Digby |
Digby (677) | ||
| 637633 | 2008-02-05 05:23:00 | Use the wizard in ZA. Dont ask me where it is, I no longer use ZA. So it brings up the subnet mask etc on all 3. If all 3 have ZA on them. |
Speedy Gonzales (78) | ||
| 637634 | 2008-02-05 05:23:00 | www.optimizingpc.com | drcspy (146) | ||
| 637635 | 2008-02-05 07:24:00 | Try setting the slave PCs IP range (in Zone Alarm trusted zone) as 192.168.0.1 - 192.168.0.255 and you should have no problems. | Roscoe (6288) | ||
| 1 | |||||