| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 88251 | 2008-03-20 21:58:00 | Computer screen won't show | Alexhughes79 (6949) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 651153 | 2008-03-20 21:58:00 | Hi , Ive got a custom build computer and i was on it this morning and turned it off to add 64mb more ram and turned it back on and no screen,so i tested onboard graphics and added graphics card but nothing and tried rebuilding it still nothing. I tested monitor and thats working. Help please? Specs AMD athlon 1.00ghz stk462 CPU 128mb PC133 SDRAM 20GB Harddrive 300watt psu Kl-133 motherboard 32x CDROM |
Alexhughes79 (6949) | ||
| 651154 | 2008-03-20 22:01:00 | Are the fans in the case spinning, when you turn it on?? 300W sounds a bit low What version of Windows is on it? This is an ASUS A7VL-VM mobo isnt it?? Is this etched on the motherboard? |
Speedy Gonzales (78) | ||
| 651155 | 2008-03-20 22:04:00 | Yes fans are spinning ,motherboard led is on , Windows xp Home sp2 | Alexhughes79 (6949) | ||
| 651156 | 2008-03-20 22:05:00 | turned it off to add 64mb more ram RAM is probably faulty or incompatible. Does it work if this new stick of RAM is removed? |
stormdragon (6013) | ||
| 651157 | 2008-03-20 22:07:00 | Hmm youre pushing it a bit with only 128 MB ram. Running XP I think Ive got the right manual, just checking it out |
Speedy Gonzales (78) | ||
| 651158 | 2008-03-20 22:12:00 | Na, I had a 128mb stick then added 64mbstick and now dos'nt go | Alexhughes79 (6949) | ||
| 651159 | 2008-03-20 22:19:00 | If you've got the mobo I posted, according to the manual Do any of these apply (to the kind of ram you installed) ? This (www.imagef1.net.nz) Or this (www.imagef1.net.nz) |
Speedy Gonzales (78) | ||
| 651160 | 2008-03-20 22:36:00 | no, I tried using other sticks and it dosn't work with the other sticks , but on the mobo it has a jumper saying 100mhz or 133mhz and thats next to the dimm slots | Alexhughes79 (6949) | ||
| 651161 | 2008-03-20 22:48:00 | Have you got the manual?? If you havent, I would direct link, download it (dlsvr01.asus.com) To make sure, the jumpers are on their default settings. Thats if this is the mobo |
Speedy Gonzales (78) | ||
| 651162 | 2008-03-20 23:17:00 | no, I tried using other sticks and it dosn't work with the other sticks , but on the mobo it has a jumper saying 100mhz or 133mhz and thats next to the dimm slots If you take out the stick of RAM that you just put in does the the computer boot? |
Sweep (90) | ||
| 1 2 3 | |||||