Forum Home
Press F1
Thread ID: 88954	2008-04-15 23:16:00	TV Tuner No Sound	w000t (11562)	Press F1

Post ID	Timestamp	Content	User
659242	2008-04-16 04:55:00	If this is it (leadtek.com.tw) Its got a connection on it, as it says alongside connectors 1 audio output connector It is PCI, but thats the only way youre going to get sound (plugging the cable into the audio connector on the card and plugging it into CD or AUX on the mobo. And some of the other cards (like the deluxe tuner, which I use), you plug it into line in (on the soundcard) from outside the case, to get sound.	Speedy Gonzales (78)
659243	2008-04-16 04:59:00	And some of the other cards (like the deluxe tuner, which I use), you plug it into line in (on the soundcard) from outside the case, to get sound. That's the way I connected mine.	ephesus (2509)
659244	2008-04-16 05:14:00	Ahh Thank you speedy, I will take the computer apart now and look. There is something in the bottom PCI slot which covers 2 so that is why I might not be able to see it. I will get back to you. Thanks	w000t (11562)
659245	2008-04-16 05:33:00	If this is your mobo (www.imagef1.net.nz) I've circled the connections bottom left	Speedy Gonzales (78)
659246	2008-04-16 05:54:00	That is the one Speedy. Here is a picture of the two connections on the mobo Link (www.imagef1.net.nz) I tried putting the cable into them but it is too big. This (www.imagef1.net.nz) is a picture of the white cable (Was in JAUX1). The black one is the cable that came with the TV tuner. There is two ends to the black one but they are exactly the same, as pictured. I tried putting the black one into JAUX1 and JCD1 but the black cable is too wide. Any suggestions?	w000t (11562)
659247	2008-04-16 06:03:00	This cable (www.dse.co.nz) Usually goes in there. If you've got a similar cable going from your cd/dvd, it should fit. The connection on the tuner should be similar to the wider connection on the right / in the above link	Speedy Gonzales (78)
1 2