| Forum Home | ||||
| PC World Chat | ||||
| Thread ID: 60380 | 2005-07-30 14:07:00 | JETWAY J530BF REV2.0 SUPER 7 MOTHERBOARDS | THOMAS35 (8628) | PC World Chat |
| Post ID | Timestamp | Content | User | ||
| 376854 | 2005-07-30 14:07:00 | Hello my name is Thomas, i don't know if any one can help me but i want the jumper settings for a JETWAY J530BF REV2.0 SUPER 7 MOTHERBOARD as i want to put an AMD 550 MHZ chip on the motherboard.now here are the specs of the main board as follows :Processor ZIF Socket 7 Pentium Processor Class Support Intel Pentium Processor & Intel Pentium Processor with MMXTM Technology CPU Support Cyrix/IBM-6x86TM & Cyrix/IBM-6x86TMMX/MII CPU Support AMD-K5 / AMD-K6 TM & AMD-K6-2TM3D & AMD-K6TM-III CPU Support IDT-C6TM & IDT WINCHIPTM & IDT WINCHIP2TM CPU :CPU Bus Frequency Support 66.8/33.4MHZ , 75/30MHZ , 83.3/33.3MHZ , 95/31.7MHZ , 100/33.3MHZ , 103/34.3MHZ , 112/37.3MHZ , 124/31.3MHZ , 133/33.3MHZ CPU/PCI Bus Frequency Support : 1.5 , 2 , 2.5 , 3 , 3.5 , 4 , 4.5 , 5 , 5.5 CPU Clock Ratio :Chipset SIS 530 / SIS 5595 Chipset (Including 6326 AGP VGA Graphic Accelerator) On Board ESS1938 SOLO1 PCI 3D Sound Chipset :3 X DIMMS for SdRam. 3 x PCI Slots. 2 x ISA Slots. Onboard Video and Sound. Onboard USB and PS2. Micro AT with AT/ATX connectors. Comes with a AMD K6-2/500mhz Cpu. This is a 2.2volt version :Amd k6-2/500afx 2.2V CORE/3.3V I/O A 0026CPIW 1998 MALAY Now if any one can help on this as i need to know if these type of boards can take an AMD 550MHZ processor. could you e-mail at [edit: non-disposable email address removed to prevent spam] or mobile235@hotmail.com thanks as this would be a big help and if any one could help me out here. |
THOMAS35 (8628) | ||
| 376855 | 2005-07-30 14:16:00 | www.j-mark.com contains specs,bios update,manual and even a section on jumpers. And no, I cant see anyone emailing you, if someone takes the time to help the very least you can do is look in the thread you started rather then wait for an email, is that the height of lazyness? |
Metla (12) | ||
| 376856 | 2005-07-31 03:07:00 | Jetway 530BF Socket 7 (www.jetway.com.tw) Motherboard specs, BIOS, drivers and manual downlaods. This is a micro AT format board, I presume you have the right kind of power suppy and case (switches are diff from ATX standard). I had a 531CF (ATX) board, which uses the same SIS 530 / 5595 chipset, that In ran a K6 111 550 on. Nothing but trouble, the chipset is crap. It may be better running a CPU that isn't at the very top of the boards capabilities, but my problems were more memoray and driver issues, IIRC. What OS are you planning to run on it? If win 95, you'll have to apply the AMD chipset fix for CPU's above 350MHz. To do that, you'll have to under-clock it, apply the patch, then reset to the correct FSB clock speed. Sorry, I can't remember all the details, it was some years ago. |
Murray P (44) | ||
| 376857 | 2005-07-31 03:40:00 | Jetway had to be one of the worst boards I have had the misfortune to come across. Its probably number 1 on my top 3 hated boards list. |
pctek (84) | ||
| 376858 | 2005-09-14 06:53:00 | i would have to agree with that last comment, i have this exact same peice of #$#! that a friend gave me to fix.. havent been able to get sound to work using jetways drivers, so installed an old pci sound card but the irq is same as onboard graphics causing flicker when there is sound and buggered if i know how to change the irq on the other hand and in jetways favour they have produced one of best SLI (and cheap) motherboards on the market according to this review.. www.anandtech.com cant find them for sale in NZ i guess because jetway has a rep for sucking bad |
Eurohoho (7394) | ||
| 376859 | 2005-09-14 10:40:00 | Change IRQ #? What OS? Try, open up Control Panel > Device Manager > Sound Card >Properties > Resources tab. Have a fiddle in there with IRQ settings, hopefully you can find a spare IRQ or share with a less fussy device. |
Murray P (44) | ||
| 1 | |||||