Forum Home
Press F1
Thread ID: 142837	2016-09-22 08:06:00	Backup Dying Hard Drive	dpDesignz (15919)	Press F1

Post ID	Timestamp	Content	User
1426324	2016-09-23 05:08:00	sometimes, using a Linux based recovery/clone just works when a MS based recovery/clone wont. Lin being less fussy than Win . I think Paragon is Lin based & free , it has a basic file copy function Ive used many times . That might be worth a try www.paragon-software.com I'd think this drive needs a full data recovery by the sound of things. Since the drive is detected & partially readable, there a good chance data recovery will work. Thanks for the suggestion. This offers me to only backup to VD. Other options I have to unlock. Is this what you use? Any tips on what settings to use? The partition table may have crashed failed. Generally is unlikely you have lost the lot. you may just need to run data recovery software over the Seagate drive. Suggest you install www.easeus.com Aim it at the USB drive. the free one will handle 2GB But will show if its recoverable. Use the Deep Scan. Expect it to take a while though, started one yesterday, was scanning a deleted partition, just under 1 TB ---- 27 hours later - recovered. As long as the drive can be seen you may have to look for this: ( of course it will be called something different & be the full size of the drive) 7472 So the odd thing is it doesn't show as corrupted, but when I try backup or anything it gives me an error saying the disk size isn't the same as stated? I'm just getting I/O errors on all disks. So I can definitely go through the drive and files etc, but if I try open anything or copy/move it, I get errors	dpDesignz (15919)
1426325	2016-09-23 05:44:00	input/output errors usually mean could be a faulty port or cable connection between the drive and motherboard. Is it possible to remove the HDD from the enclosure ? some can some cant.	wainuitech (129)
1426326	2016-09-23 06:59:00	This is my drive. I've tried to remove one of these before but it asked me to format it again? Not sure if that's cause it was damaged or not? 7477 Have tried using another power cord and usb cable with no luck	dpDesignz (15919)
1 2