| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 90335 | 2008-05-30 23:11:00 | Viewsonic VX1940W | Arnie (6624) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 674019 | 2008-05-30 23:11:00 | I have just purchased the above and connected to my desktop (Athlon 2600, 1gb ram , Nvidia FX5700) It tells me it runs best at 1680 X 1050 but my display does not allow that. Is that a video card problem (older by todays standard) or what. Can anyone make any suggestions?? Thanks |
Arnie (6624) | ||
| 674020 | 2008-05-30 23:40:00 | Hi again found the vid card instructions it does not support the above, but looks fine with the standard settings it set on installation. | Arnie (6624) | ||
| 674021 | 2008-05-31 04:16:00 | You sure? All FX5700s can go up to 2048x1536. You may need to download a new driver for the card from Nvidias website. |
pctek (84) | ||
| 674022 | 2008-05-31 04:28:00 | Have you installed ANY drivers for it? | Bantu (52) | ||
| 674023 | 2008-05-31 05:23:00 | Thanks guys you have come to the rescue again updated the drivers and it worked a treat, I have to wear my glasses now.:thanks :clap | Arnie (6624) | ||
| 674024 | 2008-05-31 11:10:00 | Change your display DPI setting from 96 to 120 (125% of normal), or even bump it up to 150% if it it still a bit small. | AvonBill (11358) | ||
| 1 | |||||