| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 91402 | 2008-07-06 01:58:00 | Case fan not working | Rosscoe (3617) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 685655 | 2008-07-06 01:58:00 | Starting PC this morning and got error Case fan not working,service pc etc.Opened case and fan not running, so purchased new fan same error on startup.It is a HP Paviliona6240a,no other problems.Can take it in to get fixed but like to try to fix myself first.Any ideas? Thanks Ross |
Rosscoe (3617) | ||
| 685656 | 2008-07-06 03:06:00 | Which fan exactly? One plugged into the MB? Its not strictly necessary, you could connect it to a molex cable with one of those adapters. | pctek (84) | ||
| 685657 | 2008-07-06 04:29:00 | The rear fan hat is screwed to the back of the case not the cpu fan. | Rosscoe (3617) | ||
| 685658 | 2008-07-06 12:19:00 | Maybe this will help h10025.www1.hp.com Are you sure its not the CPU fan (mounted at the back of the case at the end of a duct from the cpu)? |
feersumendjinn (64) | ||
| 685659 | 2008-07-07 05:32:00 | Does the new fan have two wires, and the old one three? If so, you can't get a speed signal from the fan, so you will get that error message. | Graham L (2) | ||
| 685660 | 2008-07-07 05:46:00 | Hi thanks treid the HP fix but different BOIS so no help,yes it has a three wires to the conecter ,exactly the same as the fan i unscrewwed. | Rosscoe (3617) | ||
| 685661 | 2008-07-14 07:04:00 | HI good old Harvey Norman fitted a new motherboard so all good now. | Rosscoe (3617) | ||
| 1 | |||||