| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 91451 | 2008-07-07 22:04:00 | DVD Ripping & Burning Veryyyyy SLOW! | mark1978 (13845) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 686176 | 2008-07-07 22:04:00 | Hi Guy's another interesting problem, al of a sudden my computer decided to rip a DVD in an hour instead of 20 min, also the burning of the disc takes agesssss, probably also about an hour. My burner died last saturday and I have a new one installed, but still the same ripping and burning speed. I have googled it but it seems everything is correctly updated and installed, anyone have the same problems? |
mark1978 (13845) | ||
| 686177 | 2008-07-07 22:06:00 | What else is it connected to, on the IDE connection? Did you jumper it properly? |
Speedy Gonzales (78) | ||
| 686178 | 2008-07-07 22:18:00 | Sounds like the drive is running in PIO mode. See here (winhlp.com) Download the file from number 1 and try it. |
CYaBro (73) | ||
| 686179 | 2008-07-07 22:38:00 | Hi, yes I have been reading about the PIO mode, device 0 must be the burner but was is ticked is "DMA when available" current is PIO, which needs changing but don't know how, thanks for the link CYabro I will have a look, to answer speedy's question, burner is the master, DVD rom is the slave | mark1978 (13845) | ||
| 686180 | 2008-07-07 22:56:00 | Hi Guys, I had a look but it is still the same Primary IDE channnel Device 0 device type: autodetect (is gray) Transfer mode: DMA if available and current transfer mode is PIO | mark1978 (13845) | ||
| 686181 | 2008-07-07 23:51:00 | F**K now everything is PIO....lol | mark1978 (13845) | ||
| 686182 | 2008-07-08 00:24:00 | In the device manager, remove the Secondary IDE channel, and your DVD RW. Reboot. When it comes back, the transfer mode shoudl have changed. |
wratterus (105) | ||
| 686183 | 2008-07-08 00:37:00 | It has come back to Secondary IDE Channel: Device 0 = Device type: Autodetect Transfer mode: DMA if available Current Mode: Ultra DMA Mode 4 Device 1 al the same except current mode is Ultra DMA Mode 3 The Primary IDE channel is still PIO, and ripping and burning is still the same.....crappy slow! |
mark1978 (13845) | ||
| 686184 | 2008-07-08 00:40:00 | It has come back to Secondary IDE Channel: Device 0 = Device type: Autodetect Transfer mode: DMA if available Current Mode: Ultra DMA Mode 4 Device 1 al the same except current mode is Ultra DMA Mode 3 The Primary IDE channel is still PIO, and ripping and burning is still the same.....crappy slow! Try the same with the primary channel too, delete and reboot. |
wratterus (105) | ||
| 686185 | 2008-07-08 00:45:00 | Connect an 80 wire, if its 40 wire now | Speedy Gonzales (78) | ||
| 1 2 | |||||