| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 92133 | 2008-07-30 09:30:00 | HDD... failing..?? | pingu45 (13461) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 693590 | 2008-07-30 09:30:00 | Seagate Barracuda 250G HDD First install of Win Vista bad Second install success Then overclocked CPU from 2.7GHz to 3.027GHz - AMD Ath 62 X2 Recently getting BSOD :horrified error caused by win32k.sys and PAGE_FAULT_IN_NONPAGED_AREA Also something inside the case, maybe HDD not sure, is making scratching noises on the odd occasion, like the HDD platter is being scratched by the magnet head or something... I don't know What to do??? I :wub my computer |
pingu45 (13461) | ||
| 693591 | 2008-07-30 09:38:00 | Dont overclock it? Set it back to its default settings Reconfigure the BIOS save the settings. |
Speedy Gonzales (78) | ||
| 693592 | 2008-07-30 10:21:00 | Make sure that all your data is backed up!!! | beeswax34 (63) | ||
| 693593 | 2008-07-30 10:25:00 | I've lowered the overclock... I'm counting on it happening again | pingu45 (13461) | ||
| 693594 | 2008-07-30 10:34:00 | check your HDD d/l & run the sea tools test from here tinyurl.com | kolb (10282) | ||
| 693595 | 2008-07-30 15:03:00 | I had this problem when I first got the PC in my sig. Turned out to be voltage related, try upping the voltage on your RAM a bit. | DaveBritton (7395) | ||
| 693596 | 2008-07-30 18:11:00 | PAGE_FAULT_IN_NONPAGED_AREA generally a ram problem......when you o/c you need to have ram that will handle the level of o/c.......I run twinmos ram in my home pc and it's o/c'd from 2.8ghz to 3.2ghz and runs absolutely stable.....other ram i've tried wont clock that high.... Also something inside the case, maybe HDD not sure, is making scratching noises on the odd occasion, like the HDD platter is being scratched by the magnet head or something... I don't know if that was the case it would be a dead duck VERY quickly |
drcspy (146) | ||
| 1 | |||||