Forum Home
Press F1
 
Thread ID: 92614 2008-08-16 20:00:00 Dell Dimension 2350...Help!! puffins808 (14043) Press F1
Post ID Timestamp Content User
697713 2008-08-17 04:16:00 The case is riveted shut? stormdragon (6013)
697714 2008-08-17 04:18:00 Is it still under warranty?? If it is, take it back Speedy Gonzales (78)
697715 2008-08-17 04:35:00 OK...got it opened. I cleaned the dust out. There is a plug that is not plugged to anything but is coming from the fan along with another on that is plugged in. There is a slot where I think it should be going but on the left side of the white plug that is already attached is the slot where I think it is supposed to go but there is a white thing there that is hindering it from going in and I do not want to force it. I want to add pictures but do not know how. Any help. puffins808 (14043)
697716 2008-08-17 04:35:00 Is it still under warranty?? If it is, take it back

Sorry no.
puffins808 (14043)
697717 2008-08-17 04:36:00 The case is riveted shut?

Part of it is. I did not see that one side is the side you open and there is a little black lever you push and it slides open. Sorry.
puffins808 (14043)
697718 2008-08-17 04:38:00 Let me add: It is attached to the top fan as I see two of them but I think the top one is the heatsink??? puffins808 (14043)
697719 2008-08-17 04:42:00 I want to add pictures but do not know how. Any help.

Press print screen on the keyboard, / use a camera, then paste / load it into a graphics program, and upload it here (imagef1.net.nz)

Copy and paste the link it gives you back here

Make sure theres no dust in it. Especially on / around the CPU fan. As this can cause a lot of probs.

One being overheating

Does this plug thats not connected to anything look like 4 squares?
Speedy Gonzales (78)
697720 2008-08-17 04:42:00 also make sure your bios battery ant dead that also causes it to not boot altrounson (11366)
697721 2008-08-17 04:42:00 To add picture here - go to http://imagef1.net.nz/ -- On the left, click Basic interface, then on the right, click the browse button, locate your picture, double click it and a new link will appear in the box, click upload button.

Highlight/copy the link then in your post click on the insert link As shown here (www.imagef1.net.nz) , Paste the link in the box , click OK, once inserted click outside the [/URL] and carry on typing if you want to add in more to your post.
wainuitech (129)
697722 2008-08-17 04:42:00 Upload your photos here (http://imagef1.net.nz/) then post back in here the URL ImageF1 gives you. stormdragon (6013)
1 2 3 4 5 6 7 8 9