| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 93464 | 2008-09-17 21:13:00 | Disk error in system event log | GR8Metal (14133) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 706015 | 2008-09-17 21:13:00 | Hi all, I have an XP Pro Sp2 PC with a red X error (source: disk) in the system event log which says the following... "The driver detected a controller error on \Device\Harddisk0\D" I'm not sure what the "D" represents. The hard drive is a Seagate 160GB SATA with 1 primary partition C: I've booted off the Seagate HDD test tool CD and tested hard drive with no errors?!?! Is the hard drive at fault or is something else? Cheers. |
GR8Metal (14133) | ||
| 706016 | 2008-09-17 21:47:00 | If its only 1 disk error - not that much to worry about,could have been a hick up some place - BUT if there are a few in clusters, or lots of them, then the connection between the Board and the device is failing. This could be either a faulty device, faulty ribbon/cable, or faulty header on Mother board. First try replacing the cable/ribbon between the device and MB, and make sure every thing is plugged in tight. |
wainuitech (129) | ||
| 1 | |||||